How to set the maximum number of concurrent access users for 802.1X Authentication on an Interface

Dear Friend

Please to follow the below Procedure:

Run:
system-view
The system view is displayed.

Set the maximum number of concurrent access users on an interface in the system or interface view.
In the system view:
Run:
dot1x max-user user-number interface { interface-type interface-number1 [ to interface-number2 ] } &<1-10>
The maximum number of concurrent access users is set for 802.1X authentication on the interface.

In the interface view:
Run:
interface interface-type interface-number
The interface view is displayed.

Run:
dot1x max-user user-number
The maximum number of concurrent access users is set for 802.1X authentication on the interface.

By
default, the number of 802.1X authentication users is the maximum
number of 802.1X authentication users supported by the device.

I recommend to use the weiKnow  https://support.huawei.com/iknow/?lang=en 

this will help you in technical issue 

Thank you. 

Hi E.Rami,

Run:
system-view
The system view is displayed.
Set the maximum number of concurrent access users on an interface in the system or interface view.
In the system view:
Run:
dot1x max-user user-number interface { interface-type interface-number1 [ to interface-number2 ] } &<1-10>
The maximum number of concurrent access users is set for 802.1X authentication on the interface.
In the interface view:
Run:
interface interface-type interface-number
The interface view is displayed.
Run:
dot1x max-user user-number
The maximum number of concurrent access users is set for 802.1X authentication on the interface.
By default, the number of 802.1X authentication users is the maximum number of 802.1X authentication users supported by the device.