Hello all,
This post presents the steps needed to be followed in order to set export limitations on Smartlogger3000 using Fusion Solar App.
Prerequisites
The Export Limitation feature is mainly used in the self-use scenario. The SmartLogger detects the active power of the grid-tied point electric meter, controls the active output of the inverter in a closed-loop manner, prevents the inverter output power from being transmitted to the power grid, and maximizes the inverter power generation for local load consumption.
Procedure
1. Access the Smartlogger using a mobile phone.
2. Add Power Meter.
We suppose that we install Smart Power Sensor DTSU666-H, as an example.
The communication address for Smart Power Sensor DTSU666-H is 11.
3. Set the model of the power meter.
4. Set export limitations.
Parameter configuration
Huawei Enterprise Technical Assistant Center will assist you 24x7.
E-mail: eu_inverter_support@huawei.com
