How to set connection request username and password from the OLT

Hello, friend!

I am sorry! 

It is confirmed that the URL defined in Option 43 can be set. Other parameters are not defined. Therefore, the connection request username and password cannot be changed.

The connection request username and password are set by the ISP on the ACS server or preset by the gateway and then delivered to the ONT.

If the connection request username and password need to be changed, a work order is delivered on the ACS after the ACS is reported.

Thanks!

Hello, friend!

You can run the ont tr069-server-profile add command to set the account and password for requesting a connection.

Example

To add TR069 server profile 2, and set the URL address to www.testi.com, user name to hw, password to test, and authentication domain to auth, do as follows:

huawei(config)#ont tr069-server-profile add 

{ profile-id<K>|profile-name<K>|url<K>}:profile-id 

{ profile-id<U><1,32> }:2        

{ profile-name<K>|url<K> }:url 

{ url<S><Length 1-63> }: www.test.com 

{ <cr>|user<K>}:user

{ user-name<S><length 1-50> }:hw 

{ user-password<S><length 1-25> }:test 

{ <cr>|auth-realm<K> }:auth-realm 

{ auth-realm-value<S><length 1-24>}:auth

  Command:

          ont tr069-server-profile add profile-id 2 url www.test.com user hw tes

t auth-realm auth

  Adding an ONT TR069 server profile succeeded

  Profile ID  : 2

  Profile name: tr069-server-profile_2

Thanks!