How to restore the factory defaults of VCN3010

Nasr · Created Jul 25, 2019 20:41:49

Good day!

1. Log in to the OMU portal of the MPU server as the admin user.

2. Choose Local Configuration > Switching network element type.

How to restore the factory defaults of VCN3010-3013141-1

3. Select an NE type.

4. Click Save.

How to restore the factory defaults of VCN3010-3013141-2

5. Click OK.

This article contains more resources

You need to log in to download or view. No account? Register

x

Nasr · Created Jul 25, 2019 20:41:49

Good day!

1. Log in to the OMU portal of the MPU server as the admin user.

2. Choose Local Configuration > Switching network element type.

3. Select an NE type.

4. Click Save.

5. Click OK.

This article contains more resources

You need to log in to download or view. No account? Register

x

wissal · Created Jul 25, 2019 21:27:13

Hi,
Please find below how to resolve your issue.
1. Log in to the OMU portal of an NE.
2. Click the Detail tab.
3. Select the disk in slot 0 and click Recovery in the Operation column.
The system starts to restore services. This process takes about 30 minutes. Wait until the process ends. After the system is restored, check whether the fault is rectified. If the fault persists, contact Huawei technical support engineers for assistance.
NOTE:
After VCN services are restored, the VCN restores to its factory settings. Use the data safe to restore data.
Thanks

Unicef · Created Aug 27, 2021 13:47:49

Good answer

How to restore the factory defaults of VCN3010

Best answer

This article contains more resources

This article contains more resources

Third Party’s Trade Secret

`@trans`bright_future`~trans`

My Followers

Enterprise

Consumer

Corporate

Carriers

How to restore the factory defaults of VCN3010

Best answer

This article contains more resources

This article contains more resources

Third Party’s Trade Secret

`@trans`bright_future`~trans`

My Followers