How to Reset the IP Address of the IPMI Management Network Port on an A-Node?

Before the operation, connect the A-Node with a keyboard, mouse and monitor.

1.      Reset nodes and press ESC on the BIOS startup screen and choose SCU to go to the BIOS configuration screen.

2.      Choose Advanced > IPMI BMC Configuration > BMC Configuration.

Figure 9-11  IPMI configuration items 

3.      Set the IP address, subnet mask and gateway.

·         IPv4 IP Address: 192.168.0.3

·         IPv4 Subnet Mask: 255.255.255.0

·         IPv4 Gateway Address: 0.0.0.0

Figure 9-12  Setting the IP address 

4.      Press F10 to save the settings and exit from the BIOS.