How to Reset Huaei NE40-X8 Router Console password

Hi Jogi,

1. Upload to FTP another NE configuration file (config_file.zip) for which you know the console password.

 e

2.       After you have an FTP server set up, please go to NE device in <1> Ethernet submenu

1.       =====================================

2.       *** Kernel Menu ***

3.       =====================================

4.       <0> List file(s) in cfcard.

5.       <1> Enter ethernet submenu.

6.       <2> Download debug log.

7.       <3> Change password.

8.       <4> CFcard Format Submenu.

9.       <5> Set boot file and path.

10.   <6> Reboot.

11.   <V> Review result

12.   <L> Language Switch

13.   <U> Upper Menu..

3.       Please select “Modify Ethernet interface boot parameters”.

And  input the IP of the FTP server and the username and password to loign  to the FTP server. Please make sure the IP of the NE to be in the same  network segment.

4.       Please upload the configuration from the FTP server to the NE.

5.       Then  try again to rename the startup file like you did before, but this time  please insert the name of the file transferred from FTP for which  you’ve set up the console password.

=====================================

*** Kernel Menu ***

=====================================

<0> List file(s) in cfcard.

<1> Enter ethernet submenu.

<2> Download debug log.

<3> Change password.

<4> CFcard Format Submenu.

<5> Set boot file and path.

<6> Reboot.

<V> Review result

<L> Language Switch

<U> Upper Menu..

Enter your choice: 5

=====================================

*** Boot Info submenu ***

=====================================

<0> Modify the boot file

<1> Modify the paf file

<2> Modify the config file

<3> Modify the patch file

<4> Clear the patch file

<V> Review result

<L> Language Switch

<U> Upper Menu..

Enter your choice: 2

next_cfgfile test.zip :cfcard:/test.cfg

Set next config file Success

I hope this will help you