How to replace a DIMM on the 5288 V3?
Created: Jul 23, 2019 10:45:33Latest reply: Jul 23, 2019 12:03:41
1159
7
0
0
1
Rewarded HiCoins：
0
(problem resolved)
- x
- convention：
- Emotion(0)
Featured Answers
|
Hello there! Removing a DIMM 2. Determine the rack and chassis numbers of the server to be removed and label its panel to prevent misoperations. 4. Remove all external cables, such as power and network cables. 7. Remove the supercapacitor (if it is installed). For details, see Removing the Supercapacitor (RAID Controller Card). 8. Remove the full-height full-length riser cards (if they are installed). For details, see Removing the Riser Card.  Installing a DIMM Install a DIMM to replace the original one or add a new DIMM. The rules for installing DIMMs are as follows:
 Steps 2. Remove the DIMM to be replaced or remove the DIMM filler from the slot where a new DIMM is to be installed. The method for removing a DIMM filler is the same as that for removing a DIMM. For details, see Removing a DIMM. 3. Take the spare DIMM out of the memory riser box. Figure 2. Opening the fixing clips on a DIMM slot /en-us_image_0104895094.png) 5. Align the DIMM with the DIMM slot and insert the DIMM into the slot. See Figure 3. 6. The two fixing clips close automatically. Figure 3. Installing a DIMM /en-us_image_0104895096.png) 6. Install the supercapacitor (if it is required). For details, see Installing the Supercapacitor (RAID Controller Card). 7. Install the full-height full-length riser cards if they are required. For details, see Installing a Riser Card. 10. Connect all internal cables, such as power and network cables. For details, see Connecting External Cables. |
|
All Answers
|
Hello there! Removing a DIMM 2. Determine the rack and chassis numbers of the server to be removed and label its panel to prevent misoperations. 4. Remove all external cables, such as power and network cables. 7. Remove the supercapacitor (if it is installed). For details, see Removing the Supercapacitor (RAID Controller Card). 8. Remove the full-height full-length riser cards (if they are installed). For details, see Removing the Riser Card. Installing a DIMM Install a DIMM to replace the original one or add a new DIMM. The rules for installing DIMMs are as follows:
Steps 2. Remove the DIMM to be replaced or remove the DIMM filler from the slot where a new DIMM is to be installed. The method for removing a DIMM filler is the same as that for removing a DIMM. For details, see Removing a DIMM. 3. Take the spare DIMM out of the memory riser box. Figure 2. Opening the fixing clips on a DIMM slot 5. Align the DIMM with the DIMM slot and insert the DIMM into the slot. See Figure 3. 6. The two fixing clips close automatically. Figure 3. Installing a DIMM 6. Install the supercapacitor (if it is required). For details, see Installing the Supercapacitor (RAID Controller Card). 7. Install the full-height full-length riser cards if they are required. For details, see Installing a Riser Card. 10. Connect all internal cables, such as power and network cables. For details, see Connecting External Cables. |
|
Posted by ganmianpi at 2019-07-23 10:52 Removing a DIMMWear an ESD wrist strap. For details, see Safety Instructions.Determine the rack num ... 
|
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
