How to remotely logging in to the ONT web page

Created: Feb 15, 2021 04:40:25Latest reply: Jun 5, 2021 06:52:35 1137 29 18 0 1

Abstract:

This topic will guide you to remotely log into the GPON NOT web page. By remotely logging in to the Web page, maintenance engineers can perform maintenance and troubleshooting without any site visit.

Prerequisites:

The OLT and the NMS communicate with each other properly.
The NMS is able to discover an online ONT and Layer 2 service channels between the OLT and the ONT are enabled.

Impact on the System:

NOTICE:

Exercise caution when remotely logging in to the Web page because it deteriorates ONT security.

Procedure:

Configure an ONT general VAS profile.
1. From the main menu, choose Configuration > Access Profile Management. In the navigation tree of the tab page that is displayed, choose PON Profile > ONT VAS Profile.
2. On the General ONT VAS Profile tab page, right-click, and choose Add from the shortcut menu.
3. In the dialog box that is displayed, set Name to ONT.
4. Configure static WAN parameters.
  In the navigation tree, choose General Para > WAN Device > WAN Device 1 > WAN Connection. Select WAN Connection, right-click, and choose Add IP Connection from the shortcut menu. Select WAN IP Interface1 and add a static WAN interface.
  - Set WAN Enable to Enable.
  - Set Connection Type to Routed.
  - Set Vlan ID the same as the CVLAN ID of the traffic streams configured on the OLT.
  - Set Addressing Type to Static.

For details, see Figure 1.

Figure 1 Configuring static WAN parameters

e. Click Next.

f. In the dialog box that is displayed, set vendor ID to HWTC, Terminal Type to General Type, and Version to V1R003C00-ZZ, click Add.http://localhost:7890/pages/AEF0128D/05/AEF0128D/05/resources/service/image/fig_service_035002.png

g. In the dialog box that is displayed, choose General Type Config Info > WAN Device > WAN Device 1 > WAN Connection > WAN Connection 1 > WAN IP Interface > WAN IP Interface 1, set WAN Interface Name to ONT and Service Type to INTERNET.

h. Enable the access rights on the WAN.

In the navigation tree, choose General Type Config Info > Security > ACL Services. On the right pane, set HTTP WAN Enables to enable.

For details, see Figure 2.

Figure 2 Enabling the access rights on the WAN

NOTE:

WAN-side HTTP, Telnet, and FTP access rights takes effect for only once. The access rights settings are not retained after the ONT is restarted. The system will disable the WAN-side access rights.

i. Click OK.

2. Bind a general VAS profile.

- In the Physical Map navigation tree on the Main Topology tab page, double-click the target OLT, or select the target OLT, right-click, and choose NE Explorer.

- In the navigation tree, choose GPON > GPON Management.

- In the window on the right, choose GPON ONU.

- On the GPON ONU tab page, set the search criteria to find the GPON ONU records.

- Select an ONT from the list, right-click, and choose Value-Added Service > Bind General VAS Profile from the shortcut menu. In the dialog box that is displayed, select the created profile, and click OK to complete profile binding.

3. Configure the ONT VAS.

- On the GPON ONU tab page, select an ONT, right-click, and choose Value-Added Service > Configure Value-Added Service from the shortcut menu.

- Click the Basic Parameters tab in the dialog box that is displayed, select WAN Port and setIP Address, Subnet Mask, and Default Gateway.

- Click OK. The configurations take effect without the requirement of resetting the ONT.

Result:

Enter the configured static IP address in the address bar of the Internet Explorer. The login Web page is displayed. Enter the user name and password (the default user name is telecomadmin and the default password is admintelecom). The configuration page is displayed.

https://support.huawei.com/