Hi there!
This time, I will share with you how to provide 4*10GE LAN traffic for router data traffic.
【Problem Description】
From the tx wdm side we need to provide 4*10GE LAN traffic for the router data traffic.
【Problem Analysis】
LACP in transit is only applicable to the Ethernet over SDH or packets traffic. For OTN WDM, the 10GE LAN is completely unaware of the external data device networking.
On the WDM side, you can configure several 10GE LANs in parallel, and configure ETH-TRUNK LACP on the router/switch side to increase bandwidth.
【Root cause】
From the tx wdm side we need to provide 4*10GE LAN traffic for the router data traffic.
【Solution description】
On the WDM side, you can configure several 10GE LANs in parallel, while also configuring ETH-TRUNK LACP on the router/switch side to increase bandwidth.
That's all, I welcome everyone to leave a message and exchange in the comment area!
Thank you！
