How to Port Forward with Huawei B525s-23a Router
- x
- convention：
- Emotion(0)
Posted by Longsleevehippy at 2021-02-15 13:06 Thanks, i have updated my post. Waitng... Hello, friend! There are two reasons for the failure. You can use the following template to verify: 1. The CPE dials up successfully and obtains the WAN IP address.
2. Create a port forwarding rule on the UI.
Enter ipconfig in the command line to obtain the local IP address 192.168.8.100. (2) Set the port forwarding configuration on the UI.
WAN port indicates the WAN-side port, LAN IP address indicates the local IP address, LAN port indicates the LAN-side port, Protocol indicates the protocol corresponding to the port forwarding rule, and Status is enabled.
3. Create LAN-side services through IPOP for WAN-side access. This document uses the web service as an example. The value must be the same as the LAN-side port set in step 1. (1) Create a local HTML file named default.html.
2) Use the IPOP software to set the HTML port to the local port 8080 (8080 is the UI setting).
Root Dir is the path of the default.html file in step 1, Port is the LAN port set in the Port forwarding rule, and Default Page is the HTML file name default.html. After setting the three parameters, click Start. 4. Access the local service and check whether the access is successful.
5. Access the local service from the remote server and check whether the access is successful. Open a browser on the remote server, enter http://5.5.7.53:19080 in the address box, and check whether the login is successful.
If this is successful, the port forwarding function is normal. |
|
Longsleevehippy
Created Feb 15, 2021 13:14:48
(0)
(0)
Thanks, but i had hoped to learn if there are any other users who know how to configure this myself. This seems a common problem, and i assume my ISP would only direct me back to the vendor of the router. |
Posted by Longsleevehippy at 2021-02-15 13:06 Thanks, i have updated my post. Waitng... Hello, friend! There are two reasons for the failure. You can use the following template to verify: 1. The CPE dials up successfully and obtains the WAN IP address.
2. Create a port forwarding rule on the UI.
Enter ipconfig in the command line to obtain the local IP address 192.168.8.100. (2) Set the port forwarding configuration on the UI.
WAN port indicates the WAN-side port, LAN IP address indicates the local IP address, LAN port indicates the LAN-side port, Protocol indicates the protocol corresponding to the port forwarding rule, and Status is enabled.
3. Create LAN-side services through IPOP for WAN-side access. This document uses the web service as an example. The value must be the same as the LAN-side port set in step 1. (1) Create a local HTML file named default.html.
2) Use the IPOP software to set the HTML port to the local port 8080 (8080 is the UI setting).
Root Dir is the path of the default.html file in step 1, Port is the LAN port set in the Port forwarding rule, and Default Page is the HTML file name default.html. After setting the three parameters, click Start. 4. Access the local service and check whether the access is successful.
5. Access the local service from the remote server and check whether the access is successful. Open a browser on the remote server, enter http://5.5.7.53:19080 in the address box, and check whether the login is successful.
If this is successful, the port forwarding function is normal. |
|
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
