How to pass sync via hunq2 port configured as odu2 packet

Raluca29 · Created Jul 19, 2018 11:33:43

hello. please be more specific with the question. all the details about HUNQ2 board you can find in the link below.

http://support.huawei.com/enterprise/kr/doc/DOC1000086467?section=j00k

yjhd · Created Nov 5, 2018 01:15:49

The HUNQ2 board is a hybrid line board and supports a mixture of OTN, SDH, and packet services. It can also receive and transmit only one or two of the three services. The HUNQ2 board processes and converts the received service signals into four OTU2/OTU2e signals, which are carried over four ITU-T G.694.1-compliant DWDM wavelengths.

The HUNQ2 board supports the following service conversions: 32 x ODU0/16 x ODU1/32 x ODUflex/4 x ODU2<->4 x OTU2, 4 x ODU2e<->4 x OTU2e, 16 x STM-16/4 x STM64<->4 x OTU2, and packets<->4 x OTU2. It supports hybrid transmission of ODU0, ODU1, ODU2, ODU2e, ODUflex, VC4, and packet services with the total bandwidth not exceeding 40 Gbit/s.

How to pass sync via hunq2 port configured as odu2 packet

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

How to pass sync via hunq2 port configured as odu2 packet

Third Party’s Trade Secret

My Followers