Got it

how to monitor the other IP phones status

Created: Nov 2, 2018 06:05:45Latest reply: Nov 6, 2018 07:17:43 425 7 0 0
  Rewarded HiCoins: 0 (problem resolved)
I have one u1911 and some IP phones, I want to monitor some IP phone status to know whether it is in call or free, how can I configure this?
  • x
  • convention:

Featured Answers
wangjun188
Created Nov 2, 2018 06:24:53 Helpful(1) Helpful(1)

Hello, you can use the BLF function to monitor IP phone status, please check below configurations:
1.Enable the service permission on the unified gateway.
a.Log in to the web management system of the Unified Gateway U1900 series as the administrator.
b.Choose User > SIP User.
c.Select the user number to be assigned the service permission and click Service Configuration.
d.Under Complex service, click Configure next to IP phone status detection.
e.Set Activate to Yes, set Message push to On, and click OK.
2.Enable the service permission on the IP phone.
a.Log in to the web management system of the IP phone.
b.Choose Advanced > Service Permission Management and set Busy Lamp Field to Authorized.
c.Click Save.
3.Configure a programmable button on the IP phone.
a.In the web management system of the IP phone, choose Buttons > Line & Programmable Button.
b.Click a programmable button on the right. In the window that is displayed, configure the quick dialing policy and select BLF.
c.Click Save.


View more
  • x
  • convention:

All Answers
wangjun188
wangjun188 Created Nov 2, 2018 06:24:53 Helpful(1) Helpful(1)

Hello, you can use the BLF function to monitor IP phone status, please check below configurations:
1.Enable the service permission on the unified gateway.
a.Log in to the web management system of the Unified Gateway U1900 series as the administrator.
b.Choose User > SIP User.
c.Select the user number to be assigned the service permission and click Service Configuration.
d.Under Complex service, click Configure next to IP phone status detection.
e.Set Activate to Yes, set Message push to On, and click OK.
2.Enable the service permission on the IP phone.
a.Log in to the web management system of the IP phone.
b.Choose Advanced > Service Permission Management and set Busy Lamp Field to Authorized.
c.Click Save.
3.Configure a programmable button on the IP phone.
a.In the web management system of the IP phone, choose Buttons > Line & Programmable Button.
b.Click a programmable button on the right. In the window that is displayed, configure the quick dialing policy and select BLF.
c.Click Save.


View more
  • x
  • convention:

LemonLove
LemonLove Created Nov 2, 2018 06:49:14 Helpful(1) Helpful(1)

Dear:
I hope to help you .
Configure the IP Phone status detection.
step1:login to the web management system.
step2:chosse user >>sip user
step3:search to find the number for which you want to add service rights.
step4:click service configurtaion
step5:click Configuration next to IP phone staus detection.
step6:set parameters to yes.
step7.click ok .
Phoen configuration.
step1:login ht phone by web.
step2:choose Memory key.
step3:Set Type of the memory key to BLF, Value to the monitored account, and Line to the account with the status detection service
step4:After the configuration is completed, click Confirm to save the configuration

This the document ,you can refer it too.
http://support.huawei.com/hedex/hdx.do?docid=EDOC1000032730&lang=en
Operation an Maintenace>>>Voice Service Guide>>Managment and Configuration>>IP Phone Status Detection Service.
View more
  • x
  • convention:

Zhouyu
Zhouyu Created Nov 2, 2018 07:05:59 Helpful(1) Helpful(1)

This post was last edited by Zhouyu at 2018-11-02 07:16. Hi,dear,
You can enable the BLF status detection function on an IP phone.
1.On the home screen, choose Application > Personalized > Key > Programmable Key (Extension Board).
2.Select the programmable button that you want to use, and press the Modify softkey.The page for setting the programmable key (extension board key) is displayed.
3.Select Speed Dial and press the Select softkey.
4.Enable status monitoring and set other parameters.
5.Press the Complete softkey.
View more

This article contains more resources

You need to log in to download or view. No account? Register

x
  • x
  • convention:

Nicholas.Guldan.Lee
Nicholas.Guldan.Lee Created Nov 2, 2018 07:14:45 Helpful(1) Helpful(1)

  • x
  • convention:

sunshineeee
sunshineeee Created Nov 2, 2018 07:52:41 Helpful(1) Helpful(1)

config add blfgroup



Function

This command is used to add a Busy Lamp Field (BLF) group.


Format

config add blfgroup groupname groupname dn dn [subpbxno subpbxno] [dnstep dnstep] [number number] (U1960/U1980/U1981)

config add blfgroup groupname groupname dn dn [dnstep dnstep] [number number] (U1910/U1911/U1930)
View more
  • x
  • convention:

chouhao
chouhao Created Nov 5, 2018 01:58:36 Helpful(0) Helpful(0)

Hello, bro,
Wish you can consider my solution.
You can use the BLF which can monitor IP phone status, for more details you can refer to this link:
http://support.huawei.com/hedex/hdx.do?lib=EDOC1000073292DEE0403M&docid=EDOC1000073292&lang=en&v=21&tocLib=EDOC1000073292DEE0403M&tocV=21&id=EN-US_TOPIC_0032921672&tocURL=resources/U1900/cliref/en-us_topic_0032921672.html&p=t&fe=1&ui=3&keyword=blf&text=%253Cb%253EBLF%253C%252Fb%253E%2BService
then you can monitor some IP phone status to know whether it is in call or free.how to monitor the other IP phones status-2794727-1
View more
  • x
  • convention:

chenjun108
chenjun108 Created Nov 6, 2018 07:17:43 Helpful(0) Helpful(0)

  • x
  • convention:

Comment

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

My Followers

Login and enjoy all the member benefits

Login

Huawei Enterprise Support Community
Huawei Enterprise Support Community