How to Modify the H.248 Protocol to the SIP Protocol on the MA5620

Hi friend,

The MA5620 supports H.248 by default. To change the H.248 protocol to SIP, run the protocol support  sip command.

huawei(config)#protocol support                                      

{ protocolvalue<E><h248,sip> }:sip                                    

  Command:                                                                      

          protocol support sip                                                 

  Changing of the protocol configuration takes effect after you save the data 

and then reboot the system. To ensure that the digitmap file is consistent with 

the protocol configuation, reboot the system and then re-load the digitmap file. 

Are you sure to change the protocol configuration? (y/n)[n]:y

Thanks