1, delete mtplink, the command is as follows:
Config delete mtplink linkindex xx
2, delete mtproute, the command is as follows:
Config delete mtproute linksetindex xx dpx xx
3, delete mtplinkset, the command is as follows:
Config delete mtplinkset index xx
4. Remove the DTU (MTU) binding relationship. The command is as follows:
Config modify board slot xx type mtu trunkport xx officeno xx signallingtype pra
The officeno above selects a new office number, which is temporarily borrowed and is not used for the actual trunk configuration.
At this time, modify the office number of the binding destination signaling point.
