How to make VPN data select TE tunnel forwarding

119 0 1 0

As we know the MPLS-VPN data need to forwarding by LSP. there have several tunnel can been selected, such as the LDP-LSP, TE-LSP.

if we configure the LDP and TE on the router at same time, it is defaulty to select the LDP LSP to forward the data.

but the customer want to forward the data via the TE tunnel, how to configure it?

for this issue we can configure the tunnel-policy to ensure the data select the TE tunnel first.

The configuration is as below:

1. configure the tunnel-policy

#

tunnel-policy xxxx   //set the tunnel policy name

tunnel select-seq cr-lsp lsp load-balance-number 1

#

2. binding the tunnel policy on the VPN-Instance

#

ip vpn-instance METRO-VPN

ipv4-family

route-distinguisher 100:1

tnl-policy xxx

apply-label per-instance

vpn-target 100:1 export-extcommunity

vpn-target 100:1 import-extcommunity

#

 

 

  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login