Hello, guys!
Have a nice day to you! This post describes how to log in to the OMU portal to verify VCN.
Prerequisites
Before logging in to the OMU portal of the server, configure Internet Explorer as follows:
Open Internet Explorer, and choose Tools > Internet options > Advanced.
On the Advanced tab page, deselect Use SSL 2.0, Use SSL 3.0, and select Use TLS 1.1 and Use TLS 1.2.
Click OK.
Logging In to the OMU Portal
To log in to the OMU portal, perform the following steps:
Open Internet Explorer, enter the OMU portal URL (default: https://192.168.2.101:8443/) in the address box, and press Enter. The OMU portal login page is displayed.
Enter the user name (default: admin) and password (default: Change_Me), and click Log In.
The OMU portal home page is displayed.
Verifying Proper Operation of the VCN
Log in to the OMU portal. Choose System Management > Business operation and management.
The Business operation and management page is displayed.
Click a device code and check the running status of all the modules on the VCN.
Figure-1 Checking the module running status of the VCN510–8
Troubleshooting
Symptom
The OMU portal page cannot be opened.
Possible Cause
A proxy server has been configured for Internet Explorer.
Solution
Open Internet Explorer and choose Tools > Internet Options. In the dialog box that is displayed, click the Connections tab.
Click LAN settings. In the dialog box that is displayed, click Advanced.
Under Exceptions, add the segment of IP addresses that can be used to log in to the server, for example, 192.*. Use semicolons (;) to separate the IP address segment from other IP addresses, shown as below.
Click OK.
