Dear friend!
The operation steps are as follows:
1. Connect one end of the network cable to the ETH port on the DC908 main control board and the other end to the network port on the computer.
2. On the PC, set the IP address of the DC908, for example, 129.9.0.5/255.255.0.0.
The default factory IP address of the DC908 is randomly allocated. To obtain the IP address, perform the following steps:
If a device is equipped with a panel board, you can view the default IP address of the device through the panel board.
If no panel board is configured, you can use the Web LCT to search for the default IP address of the device.
2. Enter the IP address in the address box of the browser to access the login page of the device.
User name: root
Password: Changeme_123
After the login is successful, change the password in time.

If the default password has been changed, you do not need to change it again.
Thank you!