This is the way to log in to the USG6000v using the Web in eNSP.
1. Firstly, create the Microsoft loopback interface on your Windows PC, assign an IP address to the Microsoft looback network card.
Check this video for how to create the loopback interface: https://www.youtube.com/watch?v=R9674zGHxrE.
2) Open eNSP and click on Cloud, follow the below steps:
a) from BindingInfo, choose the loopback interface, then Add.
b) from BindingInfo: choose UDP then Add.
c) from Port Mapping, choose Local Port Num: 1, Remote Port Num: 2. Then check on Two-way Channel, then Add.
3) connect the Cloud with the USG6000V interface gi 0/0/0 (MNG interface), login CLI as below:
username: admin
password: Admin@123
Then, it will request to change the default password, so enter the new password and confirm it as below:
4) after login CLI, configure the below command under the interface G 0/0/0 service-manage all permit to allow all services under this interface (especially: http).
5) open the web browser, acess https://192.168.0.1:8443 and log in using the new password.
