Hello, I want to share with you the procedure recommended by Huawei to locate an interface where a broadcast storm has occurred.
Use either of the following methods:
Check the indicator of each interface. If the indicator of an interface blinks at a higher frequency than usual, a broadcast storm may have occurred on the interface.
Run the display interface brief command to check the inbound and outbound bandwidth usage in a recent period of time on each interface. In the command output, InUti indicates the inbound bandwidth usage, and OutUti indicates the outbound bandwidth usage. If both the inbound bandwidth usage and outbound bandwidth usage on an interface approximate to 100%, a broadcast storm may have occurred on the interface.
To view only the relevant information for the case at hand, I recommend the command as follows:
display interface brief | include up
Well that's all, comment and tell us if it is useful and your experience in this regard.
