How to load voice files to the MSU board

Mihnea · Created Mar 11, 2019 08:20:15

Loading Voice Files to the Memory of the MSU Board (U2980)

Before configuring the built-in PBX, you must load the voice files used by the built-in PBX to the memory of the MSU board.

Download the voice package.
Log in to http://support.huawei.com/enterprise and download the 11_PBX_NOTE package.
Download path: SUPPORT > Product Support > Unified Communications and Collaboration > Unified Communications > Unified Communications Gateways > eSpace U2980 > eSpace U2980 V100R001C02 > 11_PBX_NOTE
Decompress the voice package.
Upload the voice files to the shared directories on the file server. You can run the LST VOLCFG command to query the shared directories. Generally, the shared directories are in the share directory.
The default directories for storing different types of voice files are as follows:
- service: default directory for storing service voice files. You can run the LST INCFG command to query the directory.
- tone: default directory for storing tone voice files. You can run the LST INCFG command to query the directory.
NOTICE:
You are not advised to change the default directories. To change the default directories, see (Optional) Changing Directories of Voice Files.
Restart the MSU board.

Query the updated tone voice files.

DSP VOICE: MN=Module number of the MSU board, TY=TONE;

If the values of Voice code are displayed, the voice files are successfully updated.

%%DSP VOICE: MN=472, TY=TONE;%%
RETCODE = 0  Operation succeeded.

module number
-------------
Module number  =  472
(Number of results = 1)

Voice code
----------
 Voice code 1  Voice code 2  Voice code 3  Voice code 4  Voice code 5

 00000000      00000001      00000002      00000003      00000004    
 00000005      00000006      00000010      00000016      00000019    
 0000001D      0000001E      00000063      00000064      00000071    
 00000029      00000032      00000036      00000040      00000041    
 00000042      00000045      00000046      00000047      00000048    
 00000049      00000050      0000003F      00000051      0000001B    
 00000082      00000083      00000084      00000085      00000086    
 00000087      00000088      00000161      00000163      000000A0    
 000000A1      000000A3      000000A5      000000AB      000000BD    
 000000FF      00007FFF      NULL          NULL          NULL
(Number of results = 10)

KarimUC · Created Mar 11, 2019 07:22:16

can you check the below link have needed info about it
http://support.huawei.com/hedex/pages/EDOC1000148382CEG0524R/10/EDOC1000148382CEG0524R/10/resources/cmsg/cc/ivr/cc_cmsg_ivr_00001.html?ft=0&fe=10&hib=5.1.5&id=cc_cmsg_ivr_00001&text=Verifying%20the%20IVR%20Service&docid=EDOC1000148382

Mihnea · Created Mar 11, 2019 08:20:15

Loading Voice Files to the Memory of the MSU Board (U2980)

Before configuring the built-in PBX, you must load the voice files used by the built-in PBX to the memory of the MSU board.

Download the voice package.
Log in to http://support.huawei.com/enterprise and download the 11_PBX_NOTE package.
Download path: SUPPORT > Product Support > Unified Communications and Collaboration > Unified Communications > Unified Communications Gateways > eSpace U2980 > eSpace U2980 V100R001C02 > 11_PBX_NOTE
Decompress the voice package.
Upload the voice files to the shared directories on the file server. You can run the LST VOLCFG command to query the shared directories. Generally, the shared directories are in the share directory.
The default directories for storing different types of voice files are as follows:
- service: default directory for storing service voice files. You can run the LST INCFG command to query the directory.
- tone: default directory for storing tone voice files. You can run the LST INCFG command to query the directory.
NOTICE:
You are not advised to change the default directories. To change the default directories, see (Optional) Changing Directories of Voice Files.
Restart the MSU board.

Query the updated tone voice files.

DSP VOICE: MN=Module number of the MSU board, TY=TONE;

If the values of Voice code are displayed, the voice files are successfully updated.

%%DSP VOICE: MN=472, TY=TONE;%%
RETCODE = 0  Operation succeeded.

module number
-------------
Module number  =  472
(Number of results = 1)

Voice code
----------
 Voice code 1  Voice code 2  Voice code 3  Voice code 4  Voice code 5

 00000000      00000001      00000002      00000003      00000004    
 00000005      00000006      00000010      00000016      00000019    
 0000001D      0000001E      00000063      00000064      00000071    
 00000029      00000032      00000036      00000040      00000041    
 00000042      00000045      00000046      00000047      00000048    
 00000049      00000050      0000003F      00000051      0000001B    
 00000082      00000083      00000084      00000085      00000086    
 00000087      00000088      00000161      00000163      000000A0    
 000000A1      000000A3      000000A5      000000AB      000000BD    
 000000FF      00007FFF      NULL          NULL          NULL
(Number of results = 10)

How to load voice files to the MSU board

Best answer

Loading Voice Files to the Memory of the MSU Board (U2980)

Loading Voice Files to the Memory of the MSU Board (U2980)

Third Party’s Trade Secret

`@trans`drinking_poetry`~trans`

My Followers

Enterprise

Consumer

Corporate

Carriers

How to load voice files to the MSU board

Best answer

Loading Voice Files to the Memory of the MSU Board (U2980)

Loading Voice Files to the Memory of the MSU Board (U2980)

Third Party’s Trade Secret

`@trans`drinking_poetry`~trans`

My Followers