- In the Service Operation panel on the left of the Workspace tab page, double-click Alarms.
- Click the Alarm Linkage tab.
- Select a camera from Camera List and click New Alarm Linkage Policy.
The New Alarm Linkage Policy window is displayed.
- Select an alarm trigger condition and click Next.
- Set the alarm linkage action.
- On the Alarm Action tab page, click .
- On the Alarm Action tab page, click User interaction.
- Click under Manual acknowledgement and add an action to trigger after you manually acknowledge an alarm.
- If an action has been triggered before user interaction, the action cannot be performed again during user interaction.
- Set Delay (s). If the alarm is not acknowledged within a time segment specified by Delay (s), the action specified by Delayed is triggered.
- Click under Delayed and add an action to trigger.
- Click Save.
- On the Alarm Action tab page, click
- Click Save.
How To Link Alarms to User Interaction ?
Created: Mar 6, 2019 11:13:00Latest reply: Mar 31, 2019 07:51:21
282
3
2
0
0
- x
- convention：
- Emotion(0)
|
|
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
