How to isolate users from different SSID?

Hello,

Please read the following information

1. Configure parameters of a WAN port.

2. Click the WLAN tab, and choose 2.4G Basic Network Settings from the navigation tree on the left. In the right pane, configure the basic parameters of the 2.4G Wi-Fi network.

Figure 1 2.4G basic network settings

3. Click Apply.

Note:

If two SSIDs are activated, they are displayed in the SSID list. When you select which one, you can set the parameter.

If the problem persists, refresh the web page. 

If the problem still cannot be solved after refreshing the page, restart the device.

If the problem still exists after restarting the device, the device may be a customized version provided by the carrier. Some functions have been deleted. You need to contact your local carrier or device provider to obtain technical support.

Good luck!  My friend

Hope it can help you 

Thanks

Hi, 

You mean block the users in the different VLANs accessing each other?

If yes, please refer to the example below:

[Huawei]acl number 3001

[Huawei-acl-adv-3001]rule 0 deny ip source 192.168.2.0 0.0.0.255 des 192.168.1.0  0.0.0.255

[Huawei-acl-adv-3001]quit

[Huawei]traffic classifier 1

[Huawei-classifier-1]if-match acl 3001

[Huawei-classifier-1]quit

[Huawei]traffic behavior 1

[Huawei-behavior-2]deny

[Huawei-behavior-2]quit

[Huawei]traffic policy 1

[Huawei-trafficpolicy-3]classifier 1 behavior 1

[Huawei-trafficpolicy-3]quit

[Huawei]vlan 2

[Huawei-vlan2]traffic-policy 1 inbound

[Huawei-vlan2]quit