Hey, everybody!
Today, I'd like to share with you how to install the CloudLink camera and connect to the endpoint.
The Camera 500 can be placed horizontally, mounted on top of a display, wall-mounted, ceiling-mounted, or placed on a tripod.
Do not remove the sliding blocks on the base before installing the. Retain the default position.
Horizontal Placement
Place the Camera 500 on a flat tabletop and connect the cables.
If you have to place the Camera 500 on a sloping surface, the slope must be less 15° for the PTZ to function properly.
Mounting on Top of a Display
The Camera 500 can be mounted on top of a display if:
Display thickness ≤ 80 mm (3.15 in.) or 100 mm (3.94 in.) < display thickness ≤ 160 mm (6.30 in.).
The display is placed horizontally.
Use the L-shaped bracket, base, 1/4"-20UNC screw, M3x10 screw assembly, and velcro tape strips which are delivered with the Camera 500. You need to prepare a ruler by yourself.
Note:
Fix the display position before installation. If the display needs to be moved after the installation, uninstall the camera and reinstall it after the movement is complete.
If the frame width of the display is less than 11.8 mm(0.46 in.), the front panel edge of the base may block part of the screen.
Wall-Mounting
The Camera 500 can also be installed on a wall if the display is wall-mounted.
Use the included plastic expansion bolts, L-shaped bracket, base, 1/4"-20 UNC screw, and M3 x 6 Phillips flat head machine screws. You will need a hammer drill, hammer, rechargeable battery-powered electric screwdriver, and Phillips screwdriver.
Ceiling Mounting
Mount the camera on the ceiling with a self-purchased bracket. The bracket must meet the following requirements:
A minimum weight load of 10.5 kg (23.15 lb) and a thickness of 2 mm (0.08 in.) to 3 mm (0.12 in.).
Comes with a location pillar, which can be inserted into the location hole of the Camera 500. The distance between the screw hole on the bracket and the location pillar must be 14.5 mm (0.57 in.), which is also the distance between the two holes at the bottom of the Camera 500.
A screw hole and one 1/4"-20 UNC screw.
Mounted on a Tripod
You can also secure the Camera 500 with a tripod. The minimum weight load of the tripod must be 10.5 kg (23.15 lb). Its mounting platform must match the bottom of the Camera 500.
Camera 500 cable connection
The Camera 500 can be connected to a video conferencing endpoint through the HT-TX or HDMI port to provide HD and UHD video solutions.
Connecting the Camera 500 to a video conferencing endpoint through HT-TX
Connect the HT-RX port on the video conferencing endpoint to the HT-TX port on the Camera 500 using a network cable, as shown in Figure 1.
Figure 1 Connection between the Camera 500 and video conferencing endpoint through HT-TX
Connecting the Camera 500 to a video conferencing endpoint through HDMI
The HDMI video input port on the video conferencing endpoint is connected to the HDMI port on the Camera 500 through an HDMI cable. The COM2 port on the video conferencing endpoint is connected to the COM IN port on the Camera 500 through a camera control cable. As shown in Figure 2.
Figure 2 Connection between the Camera 500 and video conferencing endpoint through HDMI
For details about how to install and connect the camera 500, see the following video.
This is what I want to share wiht you today, thank you!
