It should make sure:
·Storage systems can accessa File Transfer Protocol (FTP) server over the network.
The selected systemconfiguration file is correct and has been backed up.
Storage system configuration information can be imported only onthe command-line interface (CLI).
· The type of configurationfiles to be imported is *.dat. Do not modify exportedconfiguration file contents.
Do not perform anyoperation when importing configuration files.
The Step :
1. Log in to the CLI as thesuper administrator.
2. Run the importconfiguration_data ip=xxx.xxx.xxxuser=? password=? db_file=?command to import configuration files from the FTP server to the storage system.
This post was last edited by user22222222 at 2018-11-27 09:48.
