Good day, everyone!
This post refers to the procedure of how to identify the actions in the ONT logs. Please have a look below.
QUESTION
If we get the user logs or fault information of the ONT, how to identify the actions in the ONT logs?
ANSWER
1. Service provisioning from OLT to ONT
2018-06-28 00:13 [Error][Alarm-Log] AlarmID:303501,AlarmLevel:Error,OLT started to issue XML configurations
2018-06-28 00:13 [Error][Alarm-Log] AlarmID:303502,AlarmLevel:Error,OLT successfully issued XML configurations
2. Restore the factory settings by pressing the Reset button for 5-10 seconds.
2018-06-28 00:13 [Error][Alarm-Log] AlarmID:104507,AlarmLevel:Error,Configuration file is being restored.Terminal:OTHER
2018-06-28 00:13 [Error][Alarm-Log] AlarmID:104508,AlarmLevel:Error,Configuration file successfully restored.Terminal:OTHER
2018-06-28 00:13 [Error][Alarm-Log] AlarmID:104001,AlarmLevel:Error,Device reset. Cause: ONU reset by the software, Terminal:OTHER
3. Set the aclservices rule for security enhancement.
2018-06-28 00:13 [Critical][Config-Log] Terminal:OLT-XML(-),Result:Success,Type:Set,AclServices:,FTPLanEnable:0,FTPWanEnable:0,HTTPLanEnable:1,HTTPWanEnable:0,TELNETLanEnable:1,TELNETWanEnable:0
4. Upgrade the ONT software version.
2018-06-28 00:13 [Notice][Alarm-Log] AlarmID:104509,AlarmLevel:Error,Software upgrading.Terminal:OLT
2018-06-28 00:13 [Notice][Alarm-Log] AlarmID:104510,AlarmLevel:Error,Software successfully upgraded. Source version: V300R013C00SPC106B087. Target version: V300R013C10SPC128B217.Terminal:OLT
This would be the procedure of how to identify the actions in the ONT logs. Thanks for reading this post!
