How to identify a combo port on a switch

Created: Apr 10, 2017 08:53:31Latest reply: Apr 10, 2017 09:04:18 992 1 0 0

display all floors ^#1

How to identify a combo port on a switch This post was last edited by lucy_w at 2017-04-10 08:54.

x
convention：

Helpful (0) Favorite(0) Report

Adamcolob Created Apr 10, 2017 09:04:18

You can use the following methods to identify a combo port on a switch:

Identify a combo port based on the interface identifier on the switch panel. If two ports have the same ID but connect to different transmission media, the two ports are multiplexed as a combo port.
Run the display interface command to display the combo port.
< HUAWEI> display interface gigabitethernet 0/0/1
...
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 0025-9e80-2494
Port Mode: COMBO AUTO
Speed : 100, Loopback: NONE
...
You can run the combo-port command to set the working mode of a combo port.

COMBO AUTO: The combo port automatically selects the working mode.
FORCE FIBER: The combo port is configured to work as an optical port.
FORCE COPPER: The combo port is configured to work as an electrical port.

x
convention：

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:

Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy

Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

Enterprise

Consumer

Corporate

Carriers

How to identify a combo port on a switch

Third Party’s Trade Secret