How to get the IP address of reused EA-5800-X2 device

Hi, dear

Please kindly wait for a minute.

We are checking on the question.

Hello, friend!

You can run the display interface command to query the IP address of the inband management device.

Example

To query the information about VLAN interface 100, do as follows:

huawei#display interface vlanif 100

{ <cr>||<K> }:

  Command:

          display interface vlanif 100

Vlanif100 current state : UP (ifindex: 8388618)                                  

Line protocol current state : UP                                                

Description : HUAWEI, SmartAX Series, vlanif100 Interface                        

The Maximum Transmit Unit is 5000 bytes                                         

Forward plane MTU is 5000 bytes                                                 

Internet Address is 10.187.x.x/28                                             

IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00xx-fcxx-d51xx

VLAN Encap-mode : single-tag

Thanks!