How to filter CLI output with regular expression to match a pattern Huawei OLT

Hello, friend!

I'm sorry I'm late.

You direct can run the display arpip-addr [mpls] command to view the required information.

ip-addr: Queries ARP mapping entries based on a specified IP address. 

IPv4 address format. Dotted decimal notation.

You can also run the display arp all command to query all ARP mapping entries.

example:

huawei#display arp all

IP Address       MAC Address    VLAN ID F /S /P  ONT Type    VPN-Instance

10.1.1.x            00e0-fc00-xxxx     1       32/1 /0  -   Static

192.168.2.4     00e0-fc00-xxxx     N/A     MEth0    -   Dynamic

192.168.2.5     00e0-fc00-xxxx    N/A     MEth0    -   Dynamic

192.168.1.3     00e0-fc00-xxxx     2       0 /9 /0  -   Dynamic

192.168.1.4     00e0-fc00-xxxx     2       0 /9 /0  -   Dynamic

192.168.1.5     00e0-fc00-xxxx     2       0 /9 /0  -   Dynamic

192.168.1.6     00e0-fc00-xxxx     2       0 /9 /0  -   Dynamic

192.168.1.7     00e0-fc00-xxxx     2       0 /9 /0  -   Dynamic

192.168.1.8     00e0-fc00-xxxx     2       0 /9 /0  -   Dynamic

---   9 entries found   ---

Note: F--Frame, S--Slot, P--Port

Thanks!

Hello, dear!

Tested:

The OLT does not support the display arp vlan | include x command or display arp adr | include x command, but only supports the display arp all | include x command.

Example:

Thanks!