How to enable the BLF option on IP phones using U1900 PBX

Hi, dear!

Have a nice day!

How can you enable the BLF option on the IP phones using U1900 PBX? Don't worry, this topic will tell you!

1. Enable the service permission on the unified gateway.

   1. Log in to the web management system of the eSpace U1900 series unified gateway as the administrator.
      

   2. Choose User > SIP User.

   3. Select the user number to be assigned the service permission and click Service Configuration.

   4. Under Complex service, click Configure next to IP phone status detection.

   5. Set Activate to Yes, set Message push to On, and click OK

      

2. Enable the service permission on the IP phone.

   1. Log in to the web management system of the IP phone.
      

   2. Choose Advanced > Service Permission Management and set Busy Lamp Field to Authorized.

   3. Click Save.

3. Configure a programmable button on the IP phone.

   The following uses an eSpace 7910 IP phone as an example to describe the configuration procedure. For details about how to configure IP phones of another model, see the User Guide for the model.

   1. In the web management system of the IP phone, choose Buttons > Line & Programmable Button.
      

   2. Click a programmable button on the right. In the window that is displayed, configure the quick dialing policy and select BLF, as shown in the picture.

      
      

      To enable BLF and pickup on the same button, set the dialing policy of the subscribed Speed Dial to Pickup.
      

   3. Click Save.

That is all, thanks for reading!