How to do if the optical interfaces connected by a fiber cannot be Up

Latest reply: Apr 13, 2017 08:26:19 504 2 0 0
How to do if the optical interfaces connected by a fiber cannot be Up
  • x
  • convention:

user_2790689
Created Apr 13, 2017 03:41:18 Helpful(0) Helpful(0)

ding
  • x
  • convention:

Adamcolob
Created Apr 13, 2017 08:26:19 Helpful(0) Helpful(0)

"Before checking a link, check whether the LINK indicator of the interface is on. If the indicator is on, the physical link is normal. Perform the following steps:

1.Check whether either of the interfaces is shut down. If an interface is shut down, run the undo shutdown command on it.
2.If the shutdown command is not used, check whether either of the two connected optical interfaces is the combo interface. If yes, run the display this interface command to check whether the interface is FORCE FIBER. If not, run the combo-port fiber command to change the interface to the forcible optical interface.
[HUAWEI-GigabitEthernet0/0/1] display this interface
......
Port Mode: FORCE FIBER
Speed : 1000,  Loopback: NONE
Duplex: FULL,  Negotiation: ENABLE
Mdi   : NORMAL
......
3.If the two interfaces are both optical interfaces but cannot be Up, it is possible that one interface is an FE interface and the other is a GE interface. In this case, you need to disable auto-negotiation on the GE interface, set the operation mode of the GE interface to 100 Mbit/s, and set the duplex mode to full duplex. Check whether the interfaces become Up. If they are still Down, contact Huawei technical support engineers.
4.If the two interfaces are both GE interfaces, check whether the auto-negotiation status, rates, and duplex modes on the two interfaces are the same. If they are different, set them to be the same.
5.If the interfaces are still Down, ensure that input optical power on each interface is within the receiver sensibility of the interface.
6.If the problem persists, contact Huawei technical support engineers.

NOTE:
The status of a physical interface is not affected by the service configuration."
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login