Stay connected! Choose the types of newsletters you want to receive!
How to display the serial number on Huawei GPON-MA5608T
dnsna2012
Created: Nov 8, 2019 09:43:42Latest reply: Nov 3, 2020 18:13:47
5175
6
2
0
0
HiCoins as reward：
0
(problem unresolved)
Dear Team,
Greeting to the Huawei Community!
Currently I'm running the Huawei product with GPON-MA5608T. The issue is I can show the Serial of product with the CLI. (I working on it by remote host). Can someone please share any possible CLI can show the device manufacture-info ? Like a switch access network.
<SW1>dis device manufacture-info
Slot Sub Serial-number Manu-date
- - - - - - - - - - - - - - - - - - - - - -
0 - 21980106312SH7600043 2017-07-05
Best Regard,
Limchheng
- x
- convention：
- Emotion(0)
Featured Answers
Recommended answer
Hello,
display port state(gpon)FunctionExampleTo query the status of GPON port 0/4/0/, do as follows: huawei(config-if-gpon-0/4)#display port state 0
----------------------------------------------------------------------------
Port Information
----------------------------------------------------------------------------
F/S/P 0/4/0
Port state Offline
Last down cause -
Last up time -
Last down time -
Port energy-saving flag No
xPON MAC chipset state Normal
Signal detect Normal
Available bandwidth(Kbps) 1241088
Illegal rogue ONT Inexistent
----------------------------------------------------------------------------
Optical Module State
----------------------------------------------------------------------------
Optical Module status Online
Laser state Normal
TX fault Normal
Temperature(C) 31
TX Bias current(mA) 10
Supply Voltage(V) 3.20
TX power(dBm) 3.49
----------------------------------------------------------------------------
Optical Module Manufacturer Information
----------------------------------------------------------------------------
Vendor name NEOPHOTONICS
Vendor rev 1.0
Vendor OUI Unspecified
Vendor PN PTB38J0-6538E-SC
Vendor SN A1010588142
Date Code 10-10-21
Vendor specific 50 54 42 33 38 4a 30 2d 36 35 33 38 45 2d 53 43
2f 50 43 2d 4b 45 20 20 20 20 20 20 20 20 ff ff
----------------------------------------------------------------------------
Optical Module Static Information
----------------------------------------------------------------------------
Module type GPON
Module sub-type CLASS B+
Used type OLT
Encapsulation Type SFP
SFF-8472 Compliance Includes functionality described in Rev 9.5
Max Distance(Km) 20
Max rate(Kbps) 2500000
Rate Identifier Unspecified(0x0)
Wave length(nm) 1490
Fiber type Single Mode
Identifier SFP or SFP Plus
Ext.Identifier GBIC/SFP function is defined by two-wire
interface ID only
Connector SC
Encoding NRZ
Length(9um)(km) 20.0
Length(50um)(m) -
Length(62.5um)(m) -
Length(copper)(m) -
Length(50um,OM3)(m) -
BR,max Unspecified
BR,min Unspecified
Diagnostic Monitoring Type Digital diagnostic monitoring
Externally Calibrated
Power measurement type: Average Power
Options TX_DISABLE,and disables the serial output
TX_FAULT
LOS(signal inverted from standard definition)
Enhanced Options Alarm/warning flags
TX_DISABLE control and monitoring
TX_FAULT monitoring
RX_LOS monitoring
OTDR capability Not support
Cc_base 0xa1(Correct)
CC_EXT 0xaa(Correct)
----------------------------------------------------------------------------
Optical Module Threshold Parameter
----------------------------------------------------------------------------
Rx power warning
threshold(dBm) [-26.5,-9.0]
Rx power alarm
threshold(dBm) [-28.0,-8.0]
Tx power warning
threshold(dBm) [1.0,4.5]
Tx power alarm
threshold(dBm) [0.5,5.5]
Tx bias warning
threshold(mA) [0.000,70.000]
Tx bias alarm
threshold(mA) [0.000,90.000]
Supply voltage warning
threshold(V) [3.100,3.500]
Supply voltage alarm
threshold(V) [3.000,3.600]
Temperature warning
threshold(C) [-8,75]
Temperature alarm
threshold(C) [-13,80]
---------------------------------------------------------------------------- To query the states of all ports on GPON board 0/4, do as follows: huawei(config-if-gpon-0/4)#display port state all ---------------------------------------------------------------------------- F/S/P 0/4/0 Optical Module status Online Port state Offline Laser state Normal Available bandwidth(Kbps) 1241088 Temperature(C) 31 TX Bias current(mA) 10 Supply Voltage(V) 3.20 TX power(dBm) 3.49 Illegal rogue ONT Inexistent Max Distance(Km) 20 Wave length(nm) 1490 Fiber type Single Mode Length(9um)(km) 20.0 ---------------------------------------------------------------------------- F/S/P 0/4/1 Optical Module status Online Port state Offline Laser state Normal Available bandwidth(Kbps) 1241088 Temperature(C) 39 TX Bias current(mA) 13 Supply Voltage(V) 3.23 TX power(dBm) 3.52 Illegal rogue ONT Inexistent Max Distance(Km) 20 Wave length(nm) 1490 Fiber type Single Mode Length(9um)(km) 20.0 ---------------------------------------------------------------------------- F/S/P 0/4/2 Optical Module status Online Port state Offline Laser state Normal Available bandwidth(Kbps) 1241088 Temperature(C) 36 TX Bias current(mA) 12 Supply Voltage(V) 3.23 TX power(dBm) 3.38 Illegal rogue ONT Inexistent Max Distance(Km) 20 Wave length(nm) 1490 Fiber type Single Mode Length(9um)(km) 20.0 ---------------------------------------------------------------------------- F/S/P 0/4/3 Optical Module status Online Port state Offline Laser state Normal Available bandwidth(Kbps) 1241088 Temperature(C) 36 TX Bias current(mA) 0 Supply Voltage(V) 3.24 TX power(dBm) -50.00 Illegal rogue ONT Inexistent Max Distance(Km) 20 Wave length(nm) 1490 Fiber type Single Mode Length(9um)(km) 20.0 ---------------------------------------------------------------------------- F/S/P 0/4/4 Optical Module status Offline Port state Offline ---------------------------------------------------------------------------- F/S/P 0/4/5 Optical Module status Offline Port state Offline ---------------------------------------------------------------------------- F/S/P 0/4/6 Optical Module status Offline Port state Offline ---------------------------------------------------------------------------- F/S/P 0/4/7 Optical Module status Offline Port state Offline ---------------------------------------------------------------------------- To query the status of XG-PON port 0/12/0, do as follows: huawei(config-if-gpon-0/12)#display port state 0
------------------------------------------------------------------------------
Port Information
----------------------------------------------------------------------------
F/S/P 0/12/0
Port state Offline
Last down cause -
Last up time -
Last down time -
Port energy-saving flag No
Available bandwidth(Kbps) 2476800
Signal detect Failed
Illegal rogue ONT Inexistent
Multicast actual encrypt Disable
----------------------------------------------------------------------------
Optical Module State
----------------------------------------------------------------------------
Optical Module status Online
Laser state Normal
TX fault Normal
Temperature(C) 30
TX Bias current(mA) 119
Supply Voltage(V) 3.29
TX power(dBm) 4.41
----------------------------------------------------------------------------
Optical Module Manufacturer Information
----------------------------------------------------------------------------
Vendor name NEOPHOTONICS
Vendor rev 01
Vendor OUI Unspecified
Vendor SN A0412999932
Vendor PN PTNGL1-42CQ+
Date Code 12-11-01
Vendor specific 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00
----------------------------------------------------------------------------
Optical Module Static Information
----------------------------------------------------------------------------
Module type XG-PON
Module sub-type N1
Used type OLT
Encapsulation Type XFP
Wavelength(2.5G)(nm) -
Wavelength(1.25G)(nm) -
Wavelength(10G)(nm) 1577
Wavelength tolerance(nm) 2
Identifier XFP
CLEI code Not support
Tx ref clock input Not required
CDR function Support
Power level >3.5W max. power dissipation
Connector SC
RZ encoding Not support
NRZ encoding Support
8B/10B encoding Not support
64B/66B encoding Not support
Length(9um)(km) 20
Length(E-50um)(m) -
Length(50um)(m) -
Length(62.5um)(m) -
Length(copper)(m) -
BR,min(Gbit/s) 9.9000
BR,max(Gbit/s) 9.9000
Transmitter tunable Not support
Detector APD
Wavelength control Not support
Cooled transmitter device Support
Transmitter technology -
XFI Loopback mode Not support
Lineside loopback mode Not support
CDR max bit rate Not support
Max case temp 70
Max power(mW) 4000
Max low power(mW) 0
Max current(+5V)(mA) 0
Max current(+3.3V)(mA) 1000
Max current(+1.8V)(mA) 0
Max current(-5.2V)(mA) 0
Rx power measurement type Average Power
Respond to FEC BER Not support
Enhanced Options Optional Soft TX_DISABLE implemented
Aux Monitoring 1 Auxiliary monitoring not implemented
Aux Monitoring 2 Auxiliary monitoring not implemented
Temperature level Commercial
OPM precision 1dB
Cc_base 0x41(Correct)
CC_EXT 0x71(Correct)
----------------------------------------------------------------------------
Optical Module Threshold Parameter
----------------------------------------------------------------------------
Rx power warning
threshold(dBm) [-27.5,-7.0]
Rx power alarm
threshold(dBm) [-28.5,-6.0]
Tx power warning
threshold(dBm) [1.0,5.0]
Tx power alarm
threshold(dBm) [0.0,6.0]
Tx bias warning
threshold(mA) [20.000,190.000]
Tx bias alarm
threshold(mA) [10.000,200.000]
Supply voltage warning
threshold(V) [3.100,3.500]
Supply voltage alarm
threshold(V) [3.000,3.600]
Temperature warning
threshold(C) [-5,75]
Temperature alarm
threshold(C) [-10,80]
----------------------------------------------------------------------------
To query the states of all ports on XG-PON board 0/12, do as follows: huawei(config-if-gpon-0/12)#display port state all ---------------------------------------------------------------------------- F/S/P 0/12/0 Optical Module status Online Port state Offline Laser state Normal Available bandwidth(Kbps) 2476800 Temperature(C) 30 TX Bias current(mA) 119 Supply Voltage(V) 3.29 TX power(dBm) 4.41 Illegal rogue ONT Inexistent Length(9um)(km) 20 Wavelength(10G)(nm) 1577 Wavelength(1.25G)(nm) - BR,min(Gbit/s) 9.9000 BR,max(Gbit/s) 9.9000 Multicast actual encrypt Disable ---------------------------------------------------------------------------- F/S/P 0/12/1 Optical Module status Offline Port state Offline ---------------------------------------------------------------------------- F/S/P 0/12/2 Optical Module status Offline Port state Offline ---------------------------------------------------------------------------- F/S/P 0/12/3 Optical Module status Offline Port state Offline ---------------------------------------------------------------------------- Thanks
View more
|
|
All Answers
|
Hello
You can try to use the commands "display device elabel" or "display sn" Please let us know if it works..
View more
|
|
|
try " display esn " for serial number.
View more
|
|
|
You can find it here
http://gponsolution.com/huawei-ma56xx-olt-command-lists.html
View more
|
|
|
Hello,
display port state(gpon)FunctionExampleTo query the status of GPON port 0/4/0/, do as follows: huawei(config-if-gpon-0/4)#display port state 0
----------------------------------------------------------------------------
Port Information
----------------------------------------------------------------------------
F/S/P 0/4/0
Port state Offline
Last down cause -
Last up time -
Last down time -
Port energy-saving flag No
xPON MAC chipset state Normal
Signal detect Normal
Available bandwidth(Kbps) 1241088
Illegal rogue ONT Inexistent
----------------------------------------------------------------------------
Optical Module State
----------------------------------------------------------------------------
Optical Module status Online
Laser state Normal
TX fault Normal
Temperature(C) 31
TX Bias current(mA) 10
Supply Voltage(V) 3.20
TX power(dBm) 3.49
----------------------------------------------------------------------------
Optical Module Manufacturer Information
----------------------------------------------------------------------------
Vendor name NEOPHOTONICS
Vendor rev 1.0
Vendor OUI Unspecified
Vendor PN PTB38J0-6538E-SC
Vendor SN A1010588142
Date Code 10-10-21
Vendor specific 50 54 42 33 38 4a 30 2d 36 35 33 38 45 2d 53 43
2f 50 43 2d 4b 45 20 20 20 20 20 20 20 20 ff ff
----------------------------------------------------------------------------
Optical Module Static Information
----------------------------------------------------------------------------
Module type GPON
Module sub-type CLASS B+
Used type OLT
Encapsulation Type SFP
SFF-8472 Compliance Includes functionality described in Rev 9.5
Max Distance(Km) 20
Max rate(Kbps) 2500000
Rate Identifier Unspecified(0x0)
Wave length(nm) 1490
Fiber type Single Mode
Identifier SFP or SFP Plus
Ext.Identifier GBIC/SFP function is defined by two-wire
interface ID only
Connector SC
Encoding NRZ
Length(9um)(km) 20.0
Length(50um)(m) -
Length(62.5um)(m) -
Length(copper)(m) -
Length(50um,OM3)(m) -
BR,max Unspecified
BR,min Unspecified
Diagnostic Monitoring Type Digital diagnostic monitoring
Externally Calibrated
Power measurement type: Average Power
Options TX_DISABLE,and disables the serial output
TX_FAULT
LOS(signal inverted from standard definition)
Enhanced Options Alarm/warning flags
TX_DISABLE control and monitoring
TX_FAULT monitoring
RX_LOS monitoring
OTDR capability Not support
Cc_base 0xa1(Correct)
CC_EXT 0xaa(Correct)
----------------------------------------------------------------------------
Optical Module Threshold Parameter
----------------------------------------------------------------------------
Rx power warning
threshold(dBm) [-26.5,-9.0]
Rx power alarm
threshold(dBm) [-28.0,-8.0]
Tx power warning
threshold(dBm) [1.0,4.5]
Tx power alarm
threshold(dBm) [0.5,5.5]
Tx bias warning
threshold(mA) [0.000,70.000]
Tx bias alarm
threshold(mA) [0.000,90.000]
Supply voltage warning
threshold(V) [3.100,3.500]
Supply voltage alarm
threshold(V) [3.000,3.600]
Temperature warning
threshold(C) [-8,75]
Temperature alarm
threshold(C) [-13,80]
---------------------------------------------------------------------------- To query the states of all ports on GPON board 0/4, do as follows: huawei(config-if-gpon-0/4)#display port state all ---------------------------------------------------------------------------- F/S/P 0/4/0 Optical Module status Online Port state Offline Laser state Normal Available bandwidth(Kbps) 1241088 Temperature(C) 31 TX Bias current(mA) 10 Supply Voltage(V) 3.20 TX power(dBm) 3.49 Illegal rogue ONT Inexistent Max Distance(Km) 20 Wave length(nm) 1490 Fiber type Single Mode Length(9um)(km) 20.0 ---------------------------------------------------------------------------- F/S/P 0/4/1 Optical Module status Online Port state Offline Laser state Normal Available bandwidth(Kbps) 1241088 Temperature(C) 39 TX Bias current(mA) 13 Supply Voltage(V) 3.23 TX power(dBm) 3.52 Illegal rogue ONT Inexistent Max Distance(Km) 20 Wave length(nm) 1490 Fiber type Single Mode Length(9um)(km) 20.0 ---------------------------------------------------------------------------- F/S/P 0/4/2 Optical Module status Online Port state Offline Laser state Normal Available bandwidth(Kbps) 1241088 Temperature(C) 36 TX Bias current(mA) 12 Supply Voltage(V) 3.23 TX power(dBm) 3.38 Illegal rogue ONT Inexistent Max Distance(Km) 20 Wave length(nm) 1490 Fiber type Single Mode Length(9um)(km) 20.0 ---------------------------------------------------------------------------- F/S/P 0/4/3 Optical Module status Online Port state Offline Laser state Normal Available bandwidth(Kbps) 1241088 Temperature(C) 36 TX Bias current(mA) 0 Supply Voltage(V) 3.24 TX power(dBm) -50.00 Illegal rogue ONT Inexistent Max Distance(Km) 20 Wave length(nm) 1490 Fiber type Single Mode Length(9um)(km) 20.0 ---------------------------------------------------------------------------- F/S/P 0/4/4 Optical Module status Offline Port state Offline ---------------------------------------------------------------------------- F/S/P 0/4/5 Optical Module status Offline Port state Offline ---------------------------------------------------------------------------- F/S/P 0/4/6 Optical Module status Offline Port state Offline ---------------------------------------------------------------------------- F/S/P 0/4/7 Optical Module status Offline Port state Offline ---------------------------------------------------------------------------- To query the status of XG-PON port 0/12/0, do as follows: huawei(config-if-gpon-0/12)#display port state 0
------------------------------------------------------------------------------
Port Information
----------------------------------------------------------------------------
F/S/P 0/12/0
Port state Offline
Last down cause -
Last up time -
Last down time -
Port energy-saving flag No
Available bandwidth(Kbps) 2476800
Signal detect Failed
Illegal rogue ONT Inexistent
Multicast actual encrypt Disable
----------------------------------------------------------------------------
Optical Module State
----------------------------------------------------------------------------
Optical Module status Online
Laser state Normal
TX fault Normal
Temperature(C) 30
TX Bias current(mA) 119
Supply Voltage(V) 3.29
TX power(dBm) 4.41
----------------------------------------------------------------------------
Optical Module Manufacturer Information
----------------------------------------------------------------------------
Vendor name NEOPHOTONICS
Vendor rev 01
Vendor OUI Unspecified
Vendor SN A0412999932
Vendor PN PTNGL1-42CQ+
Date Code 12-11-01
Vendor specific 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00
----------------------------------------------------------------------------
Optical Module Static Information
----------------------------------------------------------------------------
Module type XG-PON
Module sub-type N1
Used type OLT
Encapsulation Type XFP
Wavelength(2.5G)(nm) -
Wavelength(1.25G)(nm) -
Wavelength(10G)(nm) 1577
Wavelength tolerance(nm) 2
Identifier XFP
CLEI code Not support
Tx ref clock input Not required
CDR function Support
Power level >3.5W max. power dissipation
Connector SC
RZ encoding Not support
NRZ encoding Support
8B/10B encoding Not support
64B/66B encoding Not support
Length(9um)(km) 20
Length(E-50um)(m) -
Length(50um)(m) -
Length(62.5um)(m) -
Length(copper)(m) -
BR,min(Gbit/s) 9.9000
BR,max(Gbit/s) 9.9000
Transmitter tunable Not support
Detector APD
Wavelength control Not support
Cooled transmitter device Support
Transmitter technology -
XFI Loopback mode Not support
Lineside loopback mode Not support
CDR max bit rate Not support
Max case temp 70
Max power(mW) 4000
Max low power(mW) 0
Max current(+5V)(mA) 0
Max current(+3.3V)(mA) 1000
Max current(+1.8V)(mA) 0
Max current(-5.2V)(mA) 0
Rx power measurement type Average Power
Respond to FEC BER Not support
Enhanced Options Optional Soft TX_DISABLE implemented
Aux Monitoring 1 Auxiliary monitoring not implemented
Aux Monitoring 2 Auxiliary monitoring not implemented
Temperature level Commercial
OPM precision 1dB
Cc_base 0x41(Correct)
CC_EXT 0x71(Correct)
----------------------------------------------------------------------------
Optical Module Threshold Parameter
----------------------------------------------------------------------------
Rx power warning
threshold(dBm) [-27.5,-7.0]
Rx power alarm
threshold(dBm) [-28.5,-6.0]
Tx power warning
threshold(dBm) [1.0,5.0]
Tx power alarm
threshold(dBm) [0.0,6.0]
Tx bias warning
threshold(mA) [20.000,190.000]
Tx bias alarm
threshold(mA) [10.000,200.000]
Supply voltage warning
threshold(V) [3.100,3.500]
Supply voltage alarm
threshold(V) [3.000,3.600]
Temperature warning
threshold(C) [-5,75]
Temperature alarm
threshold(C) [-10,80]
----------------------------------------------------------------------------
To query the states of all ports on XG-PON board 0/12, do as follows: huawei(config-if-gpon-0/12)#display port state all ---------------------------------------------------------------------------- F/S/P 0/12/0 Optical Module status Online Port state Offline Laser state Normal Available bandwidth(Kbps) 2476800 Temperature(C) 30 TX Bias current(mA) 119 Supply Voltage(V) 3.29 TX power(dBm) 4.41 Illegal rogue ONT Inexistent Length(9um)(km) 20 Wavelength(10G)(nm) 1577 Wavelength(1.25G)(nm) - BR,min(Gbit/s) 9.9000 BR,max(Gbit/s) 9.9000 Multicast actual encrypt Disable ---------------------------------------------------------------------------- F/S/P 0/12/1 Optical Module status Offline Port state Offline ---------------------------------------------------------------------------- F/S/P 0/12/2 Optical Module status Offline Port state Offline ---------------------------------------------------------------------------- F/S/P 0/12/3 Optical Module status Offline Port state Offline ---------------------------------------------------------------------------- Thanks
View more
|
|
|
hi,you can using below command to qurey it
display elabel Function This command is used to query the electronic label of a device component. To query the electronic label when the device component is replaced, use this command https://support.huawei.com/hedex/hdx.do?docid=EDOC1000171625&id=GUID6F44D9D5-EE30-4EAA-AEC0-58FBD54AEED9&lang=en
View more
|
|
|
Hello,
you can try this command: display frame serial-number in config mode
View more
|
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
