How to display bandwidth usage for AR?

Popeye_Wang · Created Dec 12, 2019 03:43:10

BYW, If you just want to observe the peak traffic, run display interface command.

display interface

Popeye_Wang · Created Dec 12, 2019 03:17:31

Hi JNL,

On a Huawei network device, you can use the display interface brief command to query the inbound and outbound bandwidth usage of all interfaces.

Popeye_Wang · Created Dec 12, 2019 03:17:31

Hi JNL,

On a Huawei network device, you can use the display interface brief command to query the inbound and outbound bandwidth usage of all interfaces.

JNL · Created Dec 12, 2019 03:20:17

Posted by Popeye_Wang at 2019-12-12 03:17 Hi JNL,On a Huawei network device, you can use the display interface brief command to query the inbo ...

Hi Popeye, thanks for your prompt reply. How about to display the bandwidth usage for last few days/hours? thanks!

Popeye_Wang · Created Dec 12, 2019 03:35:02

Posted by JNL at 2019-12-12 03:20 Hi Popeye, thanks for your prompt reply. How about to display the bandwidth usage for last few day ...

Historical traffic information cannot be viewed on the device. Only the NMS can be used for recording. For example, use the eSight.

Popeye_Wang · Created Dec 12, 2019 03:43:10

BYW, If you just want to observe the peak traffic, run display interface command.

display interface

JNL · Created Dec 12, 2019 03:47:19

Posted by Popeye_Wang at 2019-12-12 03:43 BYW, If you just want to observe the peak traffic, run display interface command.

Thanks :) I just thought there's a way to check the past bandwidth usage traffic by just using the router itself. Thanks again