This section describes how to set the Ethernet parameters and Management system IP/Domain server for Smartlogger1000&2000 in order to connect on FusionSolar monitoring portal.
Use the next Domain name to connect the Smartlogger1000@2000: intl.fusionsolar.huawei.com. If you want to set the Smartlogger1000 on the LCD screen use the next IP: 3.120.124.58
1. FusionSolar settings through WebUi for Smartlogger1000&2000
Before connect on WebUi of Smartlogger1000&2000 you need to set your local area connection of your computer with an IP in the same range like Smartlogger1000&2000 (default IP 192.168.0.10):
Go to Windows start à Control Panel à Network and Internet à Network and Sharing Center à Change adapter settings à Double click on Local Area Connection à Double click on Internet Protocol Version 4 and set the IP 192.168.0.15 like below:
Open the next link in a browser (Chrome or IE) https://192.168.0.10 and login as advanced user with the default password 'Changeme'.
2. Set the Ethernet parameters
After you login on Smartlogger1000&2000 select Settings menuàEthernetàand set the IP in the same range with your router and the Default gateway need to be the same with the router IP and submit.
The default IP for Smartlogger1000&2000 is 192.168.0.10 and if your local IP of your router is 192.168.0.1 you can leave the default Ethernet parameters like it is and the Smartlogger1000&2000 will be able to connect with the router. You can find the router IP on the label, in general the default IP of the routers is 192.168.0.1 and sometime 192.168.1.1.
If your router IP is different set the Smartlogger1000&2000 like below example:
Router IP: 192.168.1.1
Smartlogger1000&2000 Ethernet settings:
IP address: 192.168.1.10
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1(it is same with router IP)
DNS Server address:
Primary DNS: 8.8.8.8
Secondary DNS: 8.8.4.4
3. Set the FusionSolar server
From the settings menu select Management System (Neteco) and set like below:
-Server: intl.fusionsolar.huawei.com
-Port: 16100
-Address mode: Logical address
-SSL encryption: Enable
-Second challenge authentication: Disable
-Submit
You can perform a network test if the option is available.
After you set the Ethernet parameter and FusionSolar server you can create installer account connecting to the next link: https://intl.fusionsolar.huawei.com.
Contact the service team at eu_inverter_support@huawei.com for instruction.
