Hello, everyone!
In this post, I would like to share with you how to connect on-site to OSN 1800.
What you need
- an Ethernet cable
- laptop
- Navigator
-WebLCT
Operation Procedure
Firstly connect the Ethernet Cable in the ETH port of the SCC board of the OSN 1800 and your laptop`s Ethernet port.
Configure an IP Address from the same range on your computer Ethernet port.
Start Navigator and press connect. Select your computer`s IP address and the NE IP Address will appear automatically.
In the photo, 5432 is the Layer 4 port, 5432 means security SSL connection, 1400 means common connection.
Press connect. You may need to enter the user and the password. User is szhw, password nesoft.
Press ok. Now you are connected in Navigator. If you have some information you want to find out from NE, you can enter them directly in Navigator. Please use Navigator only with command reference for Navigator.
Next step-Open WebLCT in Google Chrome and click Search NE.
Select your local IP Address and the NE IP Address will appear directly. Username root, password Changeme_123.
To open NE Explorer, just right-click on the NE and select NE Explorer.
That's all, I hope you like it.
Thank you!
