How to connect IBM Tivolican to Huawei storage equipment?
Created: Jun 29, 2019 08:49:50Latest reply: Jun 29, 2019 09:59:34
413
7
2
0
2
Rewarded HiCoins：
0
(problem resolved)
- x
- convention：
- Emotion(0)
Featured Answers
|
Hello there! 1. install the SMI-S provider first. The running OS specification is as per below:  2. add the storage into the SMI-S provider. Kindly refer the guide to know the details. 3. connect the SMI-S provice to the third-party management software.  For more details, please refer to the guide: https://support.huawei.com/enter ... 15|9523109|23211898. |
|
All Answers
Johnny_Depp
Created Jun 29, 2019 09:45:01
(0)
(0)
I am using the Dorado 5000 v3, firmware version is :V300R002C10SPC100. |
|
Hi, I tried to connect it, but it failed.
 is there any introduction about network structure topology ?
|
|
|
After I quried, Dorado 5000 v3 with firmware V300R002C10SPC100, it's support SMI-S 1.5 & 1.6 & 1.6.1.
 |
|
|
Below is the requirement of network structure.
 |
|
|
Hello there! 1. install the SMI-S provider first. The running OS specification is as per below: 2. add the storage into the SMI-S provider. Kindly refer the guide to know the details. 3. connect the SMI-S provice to the third-party management software. For more details, please refer to the guide: https://support.huawei.com/enter ... 15|9523109|23211898. |
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
