Hello, everyone. I want to share a Edg1000 product case. Edg1000 Hardware Cable Collection Guide
Method introduction & Solution
1.If you connect Edg1000 to the Single-Switch Networking, you need to connect port 1 and Mgmt port to the switch and configure the same Vlan for them.

Server's ports that work in active/standby or load balancing mode must be connected to different switches to improve networking reliability; while server's ports that work in single-port mode must be evenly connected to different switches to balance the port usage on switches. If multiple servers are deployed, the occupied ports on switches must be balanced on the whole.
2.If you connect Edg1000 to the Dual-Switch Networking, you need to connect port 1 and Mgmt port to different switch and configure the same Vlan for them.

Postscript
If you have any questions, welcome to reply and exchange, looking forward to your reply and good comments. thank you.
