Hi, everyone!
Have a nice day!
Do you know how to connect a VPM220W to a videoconferencing endpoint.
This topic will tell you.
Connecting to the Videoconferencing Endpoint
The VPM220W connects to a videoconferencing endpoint over Wi-Fi. Before connecting the VPM220W to the videoconferencing endpoint, you must enable the Wi-Fi hotspot and the Dynamic Host Configuration Protocol (DHCP) service on the videoconferencing endpoint to obtain the IP address of the VPM220W. The videoconferencing endpoint functions as the DHCP server, and the VPM220W serves as the DHCP client. For details about how to enable the DHCP service, see the user guide for the HUAWEI TEX0 videoconferencing endpoint.
Figure 2-2 shows the network of VPM220W.
The VPM220W supports manual and automatic Wi-Fi connection.
Manual connection: When you use the VPM220W for the first time or move it outside the connected Wi-Fi network range, the VPM220W automatically searches for an available Wi-Fi network. After you manually connect the VPM220W to the Wi-Fi network, you need to hold and press the imgDownload?uuid=f3770d504fa44ac1b51c1b2 button on top of the VPM220W for at least 3 seconds and accept the connection request on the videoconferencing endpoint's remote controlled UI or web interface. The VPM220W then performs the Wi-Fi Protected Setup (WPS) Push Button Configuration (PBC) authentication with the videoconferencing endpoint in order to obtain an IP address. During WPS PBC authentication, the three microphone indicators blink blue in a clockwise direction.
Automatic connection: After the VPM220W first obtains an IP address, it automatically reconnects after a restart.
Thanks for reading!
