How to Configure tripwire detection on camera

Hi, Community!

Tripwire detection is used to detect whether an object steps over the tripwire along the specified direction in an observation area. If an object steps over the tripwire in the observation area, an alarm is generated. Surveillance personnel can view the video image and dispatch personnel to the site to handle the situation.

The following content will show you how to configure tripwire detection on IP camera.

Prerequisites

• A camera supports intelligent analysis.

• Global parameters have been configured and enabled.

Procedure

1. Choose Settings > Intelligent Analysis > Intelligent Alarms > Tripwire.

   The Tripwire tab page is displayed.

2. Draw a tripwire.

   1. Use the PTZ control panel to rotate the PTZ device to a target position.

   2. Click Draw and draw a tripwire on the live video image.

   3. Specify the tripwire name, and click Save.

3. Click Save.

   The tripwire detection function is configured.