How to configure the SBC IP message tracking by LMT

Latest reply: Dec 27, 2018 12:19:27 876 5 8 0

Message tracking purposes: used for delimiting signaling or media messages sent to SBC, and SBC whether to forward. Both the access side and the core side need to start tracking at the same time.

How to: login SE1000. successfully through LMT client Create the IP tracking task and start the trace

1. Select "Maintenance"-> "SE1000"-> "IP Message Trace"

2. Dual click "IP"

153841cri34ll3clsc8483.png

3. Enter the box number

4. Enter slot number

5. Enter the source IP address and mask (when IP is not filled in, the mask should be filled in as full 0, recommended for accurate address)

6. Enter the destination IP address and mask (when IP is not filled in, the mask should be filled in as full 0, recommended for accurate address)

7. Select a two-way message that represents a two-way message between the trace source and the destination address.

8.According to the actual problem position to do tick, if not clear problem, it is recommended that all selected

9. Save the trace message to the file

10. Click OK to start tracking.

153849on79umz91edad7z4.png



  • x
  • convention:

dagui
Created Dec 26, 2018 07:43:48 Helpful(0) Helpful(0)

login SE1000. successfully through LMT client Create the IP tracking task and start the trace.Can you provide a more detailed explanation?
  • x
  • convention:

xiaomumu
Created Dec 26, 2018 07:46:42 Helpful(0) Helpful(0)

This is a good post, which will be helpful in future projects
  • x
  • convention:

DZKM
Created Dec 26, 2018 08:37:27 Helpful(0) Helpful(0)

3. Enter the box number

4. Enter slot number

5. Enter the source IP address and mask (when IP is not filled in, the mask should be filled in as full 0, recommended for accurate address)

6. Enter the destination IP address and mask (when IP is not filled in, the mask should be filled in as full 0, recommended for accurate address)

7. Select a two-way message that represents a two-way message between the trace source and the destination address.

8.According to the actual problem position to do tick, if not clear problem, it is recommended that all selected

9. Save the trace message to the file

10. Click OK to start tracking.
How is this order arranged?
  • x
  • convention:

JoneSnow
Created Dec 27, 2018 08:13:43 Helpful(0) Helpful(0)

According to the actual problem position to do tick, if not clear problem, it is recommended that all selected.Can you provide a more detailed explanation?

  • x
  • convention:

user_2915719
Created Dec 27, 2018 12:19:27 Helpful(0) Helpful(0)

You'd better enable the start time and the ending time, in case you forget to stop it and it produce large amount of data How to configure the SBC IP message tracking by LMT-2835217-1
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login