How to configure the number and duration of locks for users logging in to the U1900 gateway web interface
Created: Aug 8, 2019 11:03:14Latest reply: Aug 8, 2019 11:09:32
384
1
3
0
0
Rewarded HiCoins：
0
(problem resolved)
- x
- convention：
- Emotion(0)
Featured Answers
|
Hi, feixue!
You can perform the following operations to set the locking times and duration to achieve the desired effect. 1. Log in to the CLI of the U1900 gateway. 2. In Config mode, run the config set user lock timeslimit timeslimit [locktime locktime] command to set the locking times and duration.  |
|
All Answers
|
Hi, feixue!
You can perform the following operations to set the locking times and duration to achieve the desired effect. 1. Log in to the CLI of the U1900 gateway. 2. In Config mode, run the config set user lock timeslimit timeslimit [locktime locktime] command to set the locking times and duration. |
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
