LS51T24C 0(Master) : uptime is 5 weeks, 6 days, 7 hours, 36 minutes 512M bytes DDR Memory 64M bytes FLASH Pcb Version : VER B Basic BOOTROM Version : 161 Compiled at Jul 25 2013, 12:03:10 Software Version : VRP (R) Software, Version 5.130 (V200R003C00SPC300) PWRCARD I information Pcb Version : PWR VER A PWRCARD II information Pcb Version : PWR VER A
ISIS work at OSI level, so there is no router ID :). Similar to router ID, ISIS defines system ID (part of NET). Here there is a short snip with the commands required to configure system ID. # Set the NET to 10.0001.1010.1020.1030.00, in which the system ID is 1010.1020.1030 and the area ID is 10.0001. <HUAWEI> system-view [HUAWEI] isis 1 [HUAWEI-isis-1] network-entity 10.0001.1010.1020.1030.00
TE information for ISIS(1) --------------------------
TE Statistics Information ------------------------- ISIS System Type : Level-2 ISIS Cost Style Status : Wide ISIS Level-1 Traffic Engineering Status : Configured ISIS Level-2 Traffic Engineering Status : Configured ISIS Router ID : 0.0.0.0
Tell me what it means - ISIS Router ID ? And why is he - 0.0.0.0 ?
Friend, please check below my reply to your queries:
1. Tell me what it means - ISIS Router ID ? - it represents the MPLS LSR ID and it's registered into Traffic Engineer router ID TLV. Huawei should not call it ISIS router ID, this is my honest opinion, because it may become confusing. 2. And why is he - 0.0.0.0 ? It's 0.0.0.0 because you didn't configure MPLS TE. As I said previously ISIS doesn't have a router ID. Once you enable MPLS TE the MPLS LSR ID will change from 0.0.0.0 to 1.1.1.9 for example.
Check the proof: <LSRA>dis isis traffic-eng statistics
TE information for ISIS(1) --------------------------
TE Statistics Information ------------------------- ISIS System Type : Level-2 ISIS Cost Style Status : Wide ISIS Level-1 Traffic Engineering Status : Disabled ISIS Level-2 Traffic Engineering Status : Enabled ISIS Router ID : 0.0.0.0 [LSRA]undo mpls [LSRA]undo mpls Warning: All the MPLS configurations will be deleted if the operation is perform ed! Continue? [Y/N]: y [LSRA]mpls lsr-id 9.9.9.9 [LSRA]mpls [LSRA-mpls]mpls te Info: Mpls te starting, please wait... OK! [LSRA-mpls]dis isis traffic-eng statistics
TE information for ISIS(1) --------------------------
TE Statistics Information ------------------------- ISIS System Type : Level-2 ISIS Cost Style Status : Wide ISIS Level-1 Traffic Engineering Status : Disabled ISIS Level-2 Traffic Engineering Status : Enabled ISIS Router ID : 9.9.9.9
The same Issue I am also facing regarding configuring the ISIS router ID, Issue not yet resolved need to know more about same. For more Information regarding Routers, You may Visit: https://www.linksysroutersupportnumber.com/how-to-reset-recover-change-linksys-router-password-or-login/
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."
Are you sure to block this user? Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.
Information Protection Guide
Thanks for using Huawei Enterprise Support Community! We will help you learn how we collect, use, store and share your personal information and the rights you have in accordance with Privacy Policy and User Agreement.