How to Configure the DST on SEM
Daylight saving time (DST) is the practice of adjusting clocks forward one hour during summer months and adjusting them backward in the autumn to standard time.
Procedure
1. Choose Resource management > Time Manage > DST.
2. Select
a configuration mode. The options include Date and Week, as shown in Figure 1.
Figure 1 DST configuration
Note:
If the local laws regulate that DST must
be used, configure the DST based on the regulations specified in the local
laws.
3. Set Start Time, End Time, and Offset Time for DST based on the local laws. Table 1
describes the parameters.
Table 1 Parameter description
4. Click OK.
5. Click Disable DST to disable the DST configuration.
