How to configure strict ARP entry learning on S series switches

Created: Jun 14, 2019 02:48:10Latest reply: Jun 14, 2019 02:48:55 62 1 0 0
  Rewarded Hi-coins: 0 (problem resolved)

How to configure strict ARP entry learning on S series switches

  • x
  • convention:

Featured Answers
Official Created Jun 14, 2019 02:48:55 Helpful(0) Helpful(0)

For S series switches (except S1700 switches), enabling strict ARP entry learning allows the switch to learn only ARP entries for ARP Reply packets in response to ARP Request packets sent by itself.
Enabling strict ARP entry learning on the switch device affects only the ARP entry learning on the switch, not on the hosts.

# Enable strict ARP entry learning on VLANIF 100.
[HUAWEI] interface vlanif 100
[HUAWEI-Vlanif100] arp learning strict force-enable

# Enable strict ARP entry learning globally on the switch and enable this function on GE1/0/1.
[HUAWEI] arp learning strict
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo portswitch
[HUAWEI-GigabitEthernet0/0/1] arp learning strict force-disable

The physical interfaces on some switch models cannot switch between Layer 2 and Layer 3 modes through the undo portswitch command.
  • x
  • convention:

All Answers
All_About_Switch Official Created Jun 14, 2019 02:48:55 Helpful(0) Helpful(0)

For S series switches (except S1700 switches), enabling strict ARP entry learning allows the switch to learn only ARP entries for ARP Reply packets in response to ARP Request packets sent by itself.
Enabling strict ARP entry learning on the switch device affects only the ARP entry learning on the switch, not on the hosts.

# Enable strict ARP entry learning on VLANIF 100.
[HUAWEI] interface vlanif 100
[HUAWEI-Vlanif100] arp learning strict force-enable

# Enable strict ARP entry learning globally on the switch and enable this function on GE1/0/1.
[HUAWEI] arp learning strict
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo portswitch
[HUAWEI-GigabitEthernet0/0/1] arp learning strict force-disable

The physical interfaces on some switch models cannot switch between Layer 2 and Layer 3 modes through the undo portswitch command.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Fast reply Scroll to top