How to configure NE ID for OSN 902 from CLI - Huawei Enterprise Support Community

How to configure NE ID for OSN 902 from CLI Highlighted

Created: Sep 6, 2018 07:55:44Latest reply: Sep 11, 2018 03:07:07 1165 3 5 0 0

You will need:

-laptop

-LCT cable for OSN902

-putty application

Background Information

If the NE ID is the factory-default NE ID, it must be changed to the planned NE ID. Do not use the factory-default NE ID.

Association Between the ID and IP Address of an NE

An NE ID consists of 24 bits, with 8 most significant bits for an extended ID and 16 least significant bits for a basic ID:

The extended ID ranges from 0x1 to 0xFE,
The basic ID ranges from 0x1 to 0xBFEF.

0xFFFFFF is an internal reserved value and is used as the broadcast address.

The association between the ID and IP address of an NE is described as follows:

A factory default NE IP address is provided together with the NE delivery. The factory default NE IP address is derived from the NE ID and is in the format of 129.9.basic ID(8 most significant bits).basic ID(8 least significant bits). For example, if the factory default NE ID is 0x070004, the default NE IP address is 129.9.0.4.
If the NE IP address is not manually configured, it is associated with the NE ID. To be specific, the NE IP address is changed accordingly if the NE ID is changed.
The association ends once the NE IP address is manually configured

Procedure

Run the display neid command in any view to obtain the NE ID.
Run the system-view command in the user view, the system view is displayed.
Run the set neid ne-id command in the system view to configure the NE ID.
Log in to the NE again.

Example

<HUAWEI>system-view
Enter system view, return user view with return command.
[HUAWEI]set neid 0x090002
Warning: It is dangerous to modify NE ID. It may cause communication interruption, re-login time and result is unpredictable.
Are you sure to continue? [Y/N]:y

That's all, I hope you like it.

Thank you!