Got it

How to Configure IGMP on CE Series Switches ?

645 0 0 0 0

The Internet Group Management Protocol (IGMP) is a part of the TCP/IP protocol suite used to manage IPv4 multicast group membership. IGMP sets up and maintains membership between receiver hosts and directly-connected multicast routers by exchanging IGMP messages between them.
# Enable IGMP on 10GE1/0/1connected to a user network segment.
<HUAWEI> system-view
[~HUAWEI] multicast routing-enable     //Enable IP multicast routing.
[*HUAWEI] interface 10ge 1/0/1
[*HUAWEI-10GE1/0/1] undo portswitch
[*HUAWEI-10GE1/0/1] pim sm             //Enable PIM-SM.
[*HUAWEI-10GE1/0/1] igmp enable     //Enable IGMP.
[*HUAWEI-10GE1/0/1] commit

For details about IGMP and how toconfigure it on CE12800 series switches, visit Configuration&lang=en

For details about IGMP and how to configureit on CE8800, CE7800, CE6800, and CE5800 series switches, visit Configuration&lang=en

  • x
  • convention:


You need to log in to comment to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits


Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Please bind your phone number to obtain invitation bonus.