How to configure HG8245 as an Access point
- x
- convention：
- Emotion(0)
Chenxintao
Reply Q2ASK Created Aug 8, 2021 14:53:39
(0)
(0)
If you use a home network, you can select only one ONT as the routing terminal. If you are an enterprise user, you can set the second ONT to the bridging mode to transparently transmit Ethernet services. |
|
Hello, The EchoLife HG8245, an Optical Network Terminal (ONT), is a high-end home gateway in the Huawei FTTH solution. By using the GPON technology, ultra-broadband access is provided for home and SOHO users. The HG8245 provides two POTS ports, four GE/FE auto-adapting Ethernet ports and one Wi-Fi port. The HG8245 features high-performance forwarding capabilities to ensure excellent experience with VoIP, Internet and HD video services. Therefore, the HG8245 provides a perfect terminal solution and future-oriented service supporting capabilities for FTTH deployment. Also, it matches with the below product with the same function:
PORT MAPPING CONFIGURATION 1. In the navigation tree on the left, choose Forward Rules > Port Mapping Configuration. In the pane on the right, click New. In the dialog box that is displayed, set the parameters related to port mapping, as shown in Figure 1. Figure 1. Port mapping configuration
2. Click Apply. Port mapping indicates that the Intranet server is allowed to be open to the Extranet (for example, the Intranet provides the Extranet with a WWW server or FTP server). Port mapping is to map the Intranet host IP address and port ID to the Extranet IP address and the corresponding port ID so that users from Extranets can access the Intranet server. With port mapping, the users cannot see the Intranet IP address. They see the Extranet IP address. Table 1 describes the parameters related to port mapping.
Please refer to the below link for more information: For more information about ONT port mapping, see the following video: How to configure Huawei ONT port mapping Detail https://forum.huawei.com/enterprise/en/huawei-hg8245-ont-port-mapping-guide/thread/498297-100181 Thanks | ||||||||||||||||||||||||||||||
wissal
Reply Q2ASK Created Aug 8, 2021 14:42:30
(0)
(0)
Query the ONT nameplate to determine whether an ONT supports routing. If "gateway HGU" is marked on an ONT nameplate, the ONT is of the gateway type and supports routing. If "bridging SFU" is marked on an ONT nameplate, the ONT is of the bridging type and does not support routing. Applicable Version V300R013C10 and later |
||||||||||||||||||||||||||||||
Chenxintao
Reply Q2ASK Created Aug 8, 2021 14:53:39
(0)
(0)
If you use a home network, you can select only one ONT as the routing terminal. If you are an enterprise user, you can set the second ONT to the bridging mode to transparently transmit Ethernet services. |
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
