How to configure automatic reclaim of conflicting addresses in a DHCP address pool

Latest reply: Dec 29, 2018 02:26:25 270 5 7 1

Starting with V2R9, the switch adds the ability to automatically reclaim conflicting addresses. Because some

networks may have address conflicts caused by manually configuring static IP addresses. In this case, the 

DHCP server will always set this part of the address as the conflicting address. Only when the available 

address is allocated, the DHCP server will select the available IP address from the conflicting address for 

allocation. In order to recover the conflicted address as soon as possible, management The commander

 can execute this command on the device:


<HUAWEI> system-view

[HUAWEI] ip pool global1

[HUAWEI-ip-pool-global1] conflict auto-recycle interval day 1 //Configure the automatic reclaim interval to 1 day, and the time can be hour, 

minute and day.


  • x
  • convention:

xiaomumu
Created Dec 24, 2018 01:27:15 Helpful(0) Helpful(0)


Very helpful
  • x
  • convention:

No.9527
Created Dec 26, 2018 03:24:20 Helpful(0) Helpful(0)

Dynamic Host Configuration Protocol (DHCP) is used to dynamically manage and configure the IP addresses for users in a centralized manner. DHCP adopts the client/server mode for communication. The client applies to the server for configurations (including IP address, subnet mask, and default gateway), and the server replies with corresponding configuration information based on policies.
  • x
  • convention:

GongXiaochuan
Created Dec 28, 2018 02:26:30 Helpful(0) Helpful(0)

The Dynamic Host Configuration Protocol (DHCP) is a network management protocol used on UDP/IP networks whereby a DHCP server dynamically assigns an IP address and other network configuration parameters to each device on a network so they can communicate with other IP networks
  • x
  • convention:

Good Good Study Day Day Up
Torrent
Created Dec 28, 2018 06:22:34 Helpful(0) Helpful(0)

In order to recover the conflicted address as soon as possible, management The commander

can execute this command on the device:

is the device AR device ? or switch
  • x
  • convention:

Finn92
Created Dec 29, 2018 02:26:25 Helpful(0) Helpful(0)

this requirement is really really useful , but customer must upgrade to v2r9 , could you tell me ,does all kind device support this function ?
  • x
  • convention:

Comment

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login