Steps to follow:
1. Configure an ONT general VAS profile.
a. From the main menu, choose Configuration-> Access Profile Management. In the navigation tree of the tab page that is displayed, choose PON Profile > ONT VAS Profile.
b. On the General ONT VAS Profile tab page, right-click, and choose Add from the shortcut menu.<?xml:namespace prefix = "o" />
c. In the dialog box that is displayed, set Name to ONT.
d. Configure static WAN parameters.
In the navigation tree, choose General Para -> WAN Device -> WAN Device 1 -> WAN Connection. Select WAN Connection,
right-click, and choose Add IP Connection from the shortcut menu. Select WAN IP Interface1 and add a static WAN interface.
- Set WAN Enable to Enable.
- Set Connection Type to Routed.
- Set Vlan ID the same as the
- CVLAN ID of the traffic streams configured on the OLT.
- Set Addressing Type to Static.
- Click Next.
In the dialog box that is displayed, set vendor ID to HWTC, Terminal Type to General Type, and Version to V1R003C00-ZZ, click Add.
- In the dialog box that is displayed, choose General Type Config Info > WAN Device > WAN Device 1 > WAN Connection > WAN Connection 1 > WAN IP Interface > WAN IP Interface 1, set WAN Interface Name to ONT and Service Type to INTERNET.
- Enable the access rights on the WAN.
- In the navigation tree, choose General Type Config Info > Security > ACL Services. On the right pane, set HTTP WAN Enables to enable.
- Click OK.
2. Bind a general VAS profile.
- In the Physical Map navigation tree on the Main Topology tab page, double-click the target OLT, or select the target OLT, right-click, and choose NE Explorer.
- In the navigation tree, choose GPON > GPON Management.
- In the window on the right, choose GPON ONU.- On the GPON ONU tab page, set the search criteria to find the GPON ONU records.
- Select an ONT from the list, right-click, and choose Value-Added Service > Bind General VAS Profile from the shortcut menu. In the dialog box that is displayed, select the created profile, and click OK to complete profile binding.
3. Configure the ONT VAS.
- On the GPON ONU tab page, select an ONT, right-click, and choose Value-Added Service > Configure Value-Added Service from the shortcut menu.
- Click the Basic Parameters tab in the dialog box that is displayed, select WAN Port and setIP Address, Subnet Mask, and Default Gateway.
- Click OK. The configurations take effect without the requirement of resetting the ONT.
