How to configure a log host?

user_2790689 · Created Apr 12, 2017 05:42:17

ding

Adamcolob · Created Apr 12, 2017 06:02:06

You can run the following command to configure a log host:

On an IPv4 network, run the info-center loghost ipv4-address [ { public-net | vpn-instance vpn-instance-name } | channel { channel-number | channel-name } | source-ip source-ip-address | facility local-number | port port-number | level log-level | { local-time | utc } | transport { udp | tcp [ ssl-policy policy-name ] } ] * command.
On an IPv6 network, run the info-center loghost ipv6 ipv6-address [ facility local-number | channel { channel-number | channel-name } | port port-number | level log-level | { local-time | utc } | transport { udp | tcp [ ssl-policy policy-name ] } ] * command.
By default, the device does not output logs to any log host.

The system can output logs to a maximum of eight log hosts at the same time. This allows backup among log hosts.

After a log host is configured, you can send logs in the standard format of SYSLOG to the log host for parsing and display.

For example:

# Configure the HUAWEI NetEngine5000E to send log messages to the log host with its IP address being 192.168.0.1.

[~HUAWEI] info-center loghost 192.168.0.1[~HUAWEI] commit

carlosdua · Created May 8, 2020 11:30:02

very useful

carlosdua · Created May 8, 2020 11:30:11

thanks for take your time

How to configure a log host?

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

How to configure a log host?

Third Party’s Trade Secret

My Followers