How to configure 4ES2G-S module in AR220 router

Latest reply: Oct 10, 2015 09:21:06 1526 1 0 0

Hello sirs;

I got a problem while configuring the 4ES2G-S module in AR220 router. When trying to set an Ip address on any of the 4 ports available they didnt recognize the IP ADDRESS COMMAND. What to do on each of the 4 ports on the card ?, Must to be setted in Access Mode first ?

Thanks in Advance.

Edgar Borregales.

  • x
  • convention:

h00300080
Created Oct 10, 2015 09:21:06 Helpful(0) Helpful(0)

hi:

    The 4ES2G-S is a lay 2 card , so it can not be configed ip address under physical interface view .

You can bind the physical interface to vlan  and config ip address in corresponding vlanif interface  .

  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login